EX-5s INSTRUCTION MANUAL 1
Hello, I am Lou Lentine, President of Echelon, and I would like to welcome you to the Echelon community. You’ve made a great decision for yourself and your family. The Echelon Experience is an innovative combination of fitness products integrated with our state-of-the-art Echelon Fit App. This brand-new, fitness lifestyle connects your family, friends, the Echelon community, and Echelon instructors together to help you with your fitness goals.
INCLUDES 1. 2 3 5 7 1 6 4 8 11 10 9 12 18 15 13 19 21 20 22 14 16 23 PARTS LIST 24 4 25 17 26 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 21. 22. 23. 24. 25. 26. Handlebar height adjustment lever Handlebar post f rame Resistance knob/brake lever Crank arms Seat post Seat height adjustment lever S eat slide adjustment knob 21.
ACCOUNT CREATION If this product was purchased on the echelonfit.com website, you should have received an activation email. Please follow the steps within the email to activate your account. Go to member.echelonfit.com and follow the on-screen instructions to choose a plan and setup your account. This info will be needed to login to your account. All account info and plans are managed at member.echelonfit.com and use the same login. After creating your account login on member.echelonfit.
3 3 2 2 1 1 REMOVAL OF FRAME Loosen bolts in order. 6 Remove bolts in order. Remove cardboard and then repeat on other side. Remove bolts on both sides with included tools as shown. Hold cardboard piece and remove f rame f rom bike. 2 1 Remove bolts in order with included tools as shown.
Use the included hex key to remove the metal f ront support bracket. Place the f ront foot with wheels facing forward under the f ront bracket. Insert foot bolts into f ront foot. Tighten down foot bolts with included hex key. Place the rear foot under the rear bracket. ASSEMBLY Use a pair of scissors or wire cutters to cut zip ties around wheel chocks. Using one of the wrenches, knock out the f ront then the back chock.
ASSEMBLY 8 Insert foot bolts into rear foot. Tighten down foot bolts with included hex key. Attach dumbbell holder onto seat post with screws and screwdriver end of hex key. Recommended not to exceed (2) 2 lb. dumbbells. Place seat onto seat post and secure with included wrench. Pull the wire out of f rame and the wire f rom base of handlebar post. DO NOT UNTIE TWIST TIES AT TOP OF HANDLEBAR POST.
Unscrew handlebar height adjustment lever, but do not remove. Pull lever out and fully insert handlebar post into f rame. Release lever and post is secure. Insert handlebar post screw into hole on post. Use small hex key to tighten. Ensure holes in handlebar post and handlebar post f rame align properly before inserting handlebar post bolt. Untie the twist tie at top of handlebar post, ensuring not to allow the wire to fall inside of handlebar post.
0 Slide water bottle holder onto post and secure with two screws. ASSEMBLY TROUBLE CONNECTING? 10 If your bike does not connect using the process above, navigate to the Settings app on the tablet and select Apps (on older versions of Android you will select ’Application’ and then ‘Application manger’). At the top right select the icon (on older vversions, select ‘MORE’) and then select ‘Show system’ or ‘Show system apps’.
NOTE: WE RECOMMEND HAVING HELP WITH TABLET INSTALLATION. Remove the four preinstalled screws and set to the side. Unscrew the three small preinstalled screws f rom the cover on the back of the tablet and set aside. Flip the tablet back over. Place wire clip, as shown above, and press and hold wire clip down for ten seconds for proper adhesion. Plug in power cord to DC input and place excess cord in wire clip. ASSEMBLY Peel the backing off of the included wire clip.
2 ASSEMBLY 12 Feed included zip-tie through wire clip and behind cord, as shown above. Pull zip-tie to tighten and secure cord in place. Cut excess length off of zip-tie. Place power cord in the notch of the middle perforated section of the cover and hold in place. With the power cord still in the notch, replace cover. Replace the three screws to secure the cover back on the tablet.
Screw right pedal onto right crank arm clockwise. Use double sided wrench to ensure pedal is f irmly seated against crank arm. Hold pedal with double sided wrench and use single sided wrench to tighten nut clockwise. The threads are reversed on LEFT pedal and nut. Remove nut f rom left pedal by turning clockwise. Finger tighten nut clockwise back onto pedal bolt. Screw left pedal onto crank arm counterclockwise. Use double sided wrench to ensure pedal is f irmly seated against crank arm.
4 ASSEMBLY Finger tighten nut counterclockwise back onto pedal bolt. 14 Hold pedal with double sided wrench and use single sided wrench to tighten nut counterclockwise. Plug power adapter into port located on the rear or f ront foot bracket, then plug into wall outlet.
Turn seat slide adjustment lever counterclockwise to loosen. Turn handlebar adjustment lever counterclockwise until you are able to pull the lever halfway out. Turn seat height adjustment lever counterclockwise until you are able to pull the lever halfway out. Pull and hold the handlebar adjustment lever and raise or lower the handlebars to desired position. Ensure lever engages one of the adjustment holes. Turn handlebar adjustment lever clockwise until secure.
6 FEDERAL COMMUNICATIONS COMMISSION (FCC) STATEMENT 15.21 YOU ARE CAUTIONED THAT CHANGES OR MODIFICATIONS NOT EXPRESSLY APPROVED BY THE PART RESPONSIBLE FOR COMPLIANCE COULD VOID THE USER’S AUTHORITY TO OPERATE THE EQUIPMENT. SAFETY INFO AND WARNINGS 15.105(B) THIS EQUIPMENT HAS BEEN TESTED AND FOUND TO COMPLY WITH THE LIMITS FOR A CLASS B DIGITAL DEVICE, PURSUANT TO PART 15 OF THE FCC RULES.
INNOVATION, SCIENCE AND ECONOMIC DEVELOPMENT CANADA (ISED) INNOVATION, SCIENCE ET DÉVELOPPEMENT ÉCONOMIQUE CANADA (ISED) THIS CLASS B DIGITAL APPARATUS COMPLIES WITH CANADIAN ICES-003 CET APPAREIL NUMÉRIQUE DE CLASSE B EST CONFORME À LA NORME NMB-003. CANADIAN NOTICE THIS DEVICE COMPLIES WITH ISED LICENSE-EXEMPT RSS STANDARD(S).
8 NOTE: CARE SHOULD BE TAKEN IN MOUNTING AND DISMOUNTING THE STATIONARY EXERCISE BIKE. BEFORE MOUNTING OR DISMOUNTING MOVE THE PEDAL ON THE MOUNTING OR DISMOUNTING SIDE TO ITS LOWEST POSITION AND BRING THE MACHINE TO A COMPLETE STOP. THE MANUFACTURER RECOMMENDS TO PLACE THE ECHELON® CONNECT BIKE IN A SPACE WHERE YOU HAVE TWO FEET OF CLEARANCE ON ALL SIDES OF THE BIKE FOR SAFE MOUNTING AND DISMOUNTING OF THE EXERCISE BIKE. THE MINIMUM DIMENSIONS ARE: 0.5 M (19.7 IN.) ON AT LEAST ONE SIDE, AND 0.5 M (19.
1. An appliance should never be left unattended when plugged in. Unplug from outlet when not in use, and before putting on or taking off parts. 2. D o not operate under blanket or pillow. Excessive heating can occur and cause fire, electric shock, or injury to persons. 3.
0 BEFORE starting any fitness or strength program, consult with your physician or health official. This will ensure that you engage in the proper strength or fitness program for your age and physical condition.
• NEVER use the bike if it is not properly/completely assembled or is damaged in any way. •N EVER exceed the weight limit for this bike. The weight limit for this bike is 300 pounds. Do not use the Echelon® Connect if your body weight is in excess of 300 pounds. • NEVER use Echelon® Connect when sick or fatigued. •A LWAYS wear proper attire and footwear that fully covers your feet. Long hair should be tied back or tucked away. Ensure that shoelaces are tucked into your shoes.
2 •A LWAYS ensure that the Echelon® Connect is wiped down after each use to keep it sanitary. •C leaning and user maintenance shall not be made by children without supervision. If any problems arise affecting the performance of the Echelon® Connect, contact the manufacturer immediately. Always ensure that parts which undergo wear are checked regularly.