Other Document

9
9
Untie the twist tie at top of
handlebar post, ensuring not to
allow the wire to fall inside of
handlebar post. Connect the wire
from the handlebar post to the wire
at bottom of screen mount.
Place handlebars onto handlebar
post. Secure with handlebar
adjustment knob with adjustment
knob washer.
Connect the one wires from frame
and handlebar post together, then
feed excess wire down into frame.
Insert handlebar post screw into
hole on post. Use small hex key to
tighten. Ensure holes in handlebar
post and handlebar post frame align
properly before inserting handlebar
post bolt.
Unscrew handlebar height
adjustment lever, but do not remove.
Pull lever out and fully insert
handlebar post into frame. Release
lever and post is secure.
Feed excess wire into handlebar
postand slide screen mount into
handlebar post. Secure with tablet
mount post bolts.
ASSEMBLY