CONNECT SPORT INSTRUCTION MANUAL
Hello, I am Lou Lentine, President of Echelon, and I would like to welcome you to the Echelon community. You’ve made a great decision for yourself and your family. The Echelon Experience is an innovative combination of fitness products integrated with our state-of-the-art Echelon Fit App. This brand-new, fitness lifestyle connects your family, friends, the Echelon community, and Echelon instructors together to help you with your fitness goals.
INCLUDES 1. 1 3 2 4 7 6 9 5 4 8 9 10 11 13 12 16 17 18 19 15 PARTS LIST 14 15 23 24 25 20 21 22 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 21. 22. 23. 24. 25.
ACCOUNT CREATION If this product was purchased on the echelonfit.com website, you should have received an activation email. Go to member.echelonfit.com and follow the on-screen instructions to choose a plan and setup your account. This info will be needed to login to your account on the Echelon FitTM App. All account info and plans are managed at member.echelonfit.com and use the same login. After creating your account login on member.echelonfit.com, write down your login info.
DOWNLOAD THE ECHELON FIT APP Ensure latest version of the Echelon Fit™ App is installed from the Google Play Store or the App Store. OPERATIONAL INSTRUCTIONS QUICK START GUIDE Connect to the Echelon FitTM App to access tutorials and operation instructions.
Using your wrench or f ingers, pull wheel chock out and set aside. Place the f ront foot with wheels facing forward under the f ront bracket. Insert foot bolts into f ront foot and tighten down with hex key. Place the rear foot under the rear bracket. Insert foot bolts into rear foot and tighten down with hex key. REMOVAL OF FRAME Lay the Connect Sport its side and remove wheel chock bolts with hex key and set to the side.
ASSEMBLY Place seat onto seat post and secure with included wrench. Unscrew handlebar height adjustment lever, but do not remove. Pull lever out and fully insert handlebar post into f rame. Release lever and post is secure. Connect the coiled wire f rom the bike to the wire at coming out of the handlebar post. Place the handlebars on the handlebar post and the handlebar bottom bracket (shown above) and screw in the handlebar post screw with hex key.
The threads are reversed on LEFT pedal and nut. Use double sided wrench to ensure pedal is f irmly seated against crank arm. Hold pedal with double sided wrench and use single sided wrench to tighten nut counterclockwise. Remove nut f rom right pedal by turning counterclockwise. Screw right pedal onto crank arm clockwise. ASSEMBLY Screw left pedal onto crank arm counterclockwise. Finger tighten nut counterclockwise back onto pedal bolt.
0 ASSEMBLY Use double sided wrench to ensure pedal is f irmly seated against crank arm. Finger tighten nut clockwise back onto pedal bolt. Plug power adapter into port located on the rear foot bracket, then plug into wall outlet. The assembly of your Echelon® Connect Sport bike is now complete! Hold pedal with double sided wrench and use single sided wrench to tighten nut clockwise.
Turn seat slide adjustment lever counterclockwise to loosen. Move seat along track to desired location. Turn seat slide adjustment lever clockwise to tighten and secure in place. Turn seat height adjustment lever counterclockwise until you are able to pull the lever halfway out. Pull and hold the seat height adjustment lever and raise the seat to desired position. Ensure lever engages one of the adjustment holes. Turn seat height adjustment lever clockwise until secure.
2 HANDLEBAR / leveling ADJUSTMENT Turn handlebar adjustment lever counterclockwise until you are able to pull the lever halfway out. Pull and hold the handlebar adjustment lever and raise or lower the handlebars to desired position. Ensure lever engages one of the adjustment holes. Turn handlebar adjustment lever clockwise until secure. To level the Connect Sport, adjust the pads on the f ront and rear feet until stable.
There are two different positions (shown below) you will see during classes on the Echelon Fit™ app. Fig. 1 demonstrates a relaxed upper body while in seated position. Fig. 2 demonstrates proper hand placement and weight distribution while in an upright position. FIG. 2 OPERATION FIG.
4 OPERATION To adjust the resistance while using the Echelon ® Connect Sport, turn the resistance adjustment knob to the left or right, as shown in Fig. 3. To stop the bike press down on the resistance adjustment knob, as shown in Fig. 4. FIG. 3 FIG.
SPECS Input: 100-240V~ 50/60Hz 0.2A Output: 9V 0.5A QDID: 60912 FCC ID: 2AMDBBLE002 CAN ICES-3 (B)/NMB-3(B) HVIN: 1.0 IC: 22882-BLE002 DIMENSIONS: 42" L × 20.5" W × 45" H Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this device. FEDERAL COMMUNICATIONS COMMISSION (FCC) STATEMENT 15.
6 FCC RF RADIATION EXPOSURE STATEMENT: 1. T HIS TRANSMITTER MUST NOT BE CO-LOCATED OR OPERATING IN CONJUNCTION WITH ANY OTHER ANTENNA OR TRANSMITTER. 2. T HIS EQUIPMENT COMPLIES WITH RF RADIATION EXPOSURE LIMITS SET FORTH FOR AN UNCONTROLLED ENVIRONMENT. THIS EQUIPMENT SHOULD BE INSTALLED AND OPERATED WITH A MINIMUM DISTANCE OF 20 CM BETWEEN THE RADIATOR AND YOUR BODY. THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES.
NOT BE CO-LOCATED OR OPERATING IN CONJUNCTION WITH ANY OTHER ANTENNA OR TRANSMITTER. 2. T O COMPLY WITH RSS 102 RF EXPOSURE COMPLIANCE REQUIREMENTS, A SEPARATION DISTANCE OF AT LEAST 20 CM MUST BE MAINTAINED BETWEEN THE ANTENNA OF THIS DEVICE AND ALL PERSONS. ATTENTION: EXPOSITION AU RAYONNEMENT RADIOFRÉQUENCE. 1.
8 DANGER To reduce the risk of electric shock: 1. Always unplug this appliance from the electrical outlet immediately after using and before cleaning. WARNING - To reduce the risk of burns, fire, electric shock, or injury to persons: 1. An appliance should never be left unattended when plugged in. Unplug from outlet when not in use, and before putting on or taking off parts. SAFETY INFO AND WARNINGS 2. Do not operate under blanket or pillow.
8. Never operate the appliance with the air openings blocked. Keep the air openings free of lint, hair, and the like. 9. Never drop or insert any object into any opening. 10. Do not use outdoors. 11. Do not operate where aerosol (spray) products are being used or where oxygen is being administered. 12. To disconnect, turn all controls to the off position, then remove plug from outlet. BEFORE starting any fitness or strength program, consult with your physician or health official.
0 WARNINGS • ALWAYS use the Echelon® Connect Sport on solid, level ground and in a well lit and ventilated area. • ALWAYS check that the seat and handlebars are securely fastened before use. • NEVER allow children to play on or around the bike. This helps protect them from injury from moving parts. • ALWAYS set the bike up properly for your specific body type.
of water and a towel close by to absorb sweat from your body and the handlebars. •N EVER use the Echelon® Connect Sport in a standing position at high revolutions per minute (RPM) (see OPERATION section, Fig. 2). •A LWAYS keep your pelvis positioned over the center line of the Echelon® Connect Sport. •N EVER adjust the resistance of the flywheel or the position of the handlebars while in a standing position (see OPERATION section, Fig. 2).
2 If you are looking for an immediate answer, please visit us at this web address. This is where you can find our FAQ section and live support! https://echelonfit.zendesk.com SAFETY INFO AND WARNINGS / Warranty Read Instructions Before Operating MADE IN CHINA PATENT PENDING Rev: 062620 ECHELONFIT.COM For questions, assistance, or replacement parts, do not return to your retailer. Contact Echelon® customer service below.
