ECHELON [3 CIR Iam Lou Len tine, President of Echelon, and | would like to welcome you to the Echelon community. You've made a great decision for yourself and your family. The Echelon Experience is an innovative combination of fitness products integrated with our state-of-the-art Echelon Fit App. This brand-new, fitness lifestyle connects your family, friends, the Echelon community, and Echelon instructors together to help you with your fitness goals.
INCLUDES Handlebar Adjustment Knob Handlebar Post Frame EEE CLERIC TET ETE GT Cranks Seat Post Seat Height Adjustment Lever Seat Slide Adjustment Knob Ch Ie CH LET: EE 10" HD Screen Front Foot Handlebars Screen Post Handlebar Post BL: Water Bottle Holders Rear Foot LEECH [VLE EEE . Foot Bolts Screen Post Bolts with Washers Dumbbell Holder Screws Water Bottle Holder Screws Handlebar Bolts . Double-Sided Wrench CT Hex Key with Phillips Screwdriver Head .
ACCOUNT CREATION If this product was purchased on the echelonfit.com website, you should have received an activation email. Please follow the steps within the email to activate your account. Go to member.echelonfit.com and follow the on-screen instructions to choose a plan and setup your account. This info will be needed to login to your account. All account info and plans are managed at member.echelonfit.com and use the same login. After creating your account login on member.echelonfit.
Loosen bolts in order. Remove bolts in order. Remove cardboard and then repeat on other side. Remove bolts in order with included Remove bolts on both sides with Hold cardboard piece and remove [mn] tools as shown. included tools as shown. frame from bike.
Use a pair of scissors or wire cutters to cut zip ties around wheel sacks. Using one of the wrenches, knock out the front then the back chock. Use the included hex key to remove the metal front bracket support. Repeat for the rear bracket support. Insert foot bolts into front foot. Tighten down foot bolts with included hex key. Place the front foot (with wheels) under the front bracket. Place the rear foot under the rear bracket.
Insert foot bolts into rear foot. Tighten down foot bolts with included hex key. Bolt dumbbell holder onto seat post with included hex key. Place seat onto seat post and tighten down and secure with included wrench. Pull the wires out of the handlebar post frame. Connect the wire from the frame to the wire from the bottom of the handlebar post.
Insert the post into the frame Place handlebars on handlebar post. while pulling out the handlebar While holding handlebars in place, adjustment knob. insert the handlebar bolts and finger tighten. Use the included hex key to tighten the bolts and secure the handlebars. Connect the wire from the top of Insert the screen post into the the handlebar post to the wire from handlebar post. Finger tighten the the bottom of the screen post. screen post bolts Use the hex key to tighten the screen post bolts.
S ASSEMBLY Remove nut from right pedal by Screw right pedal onto right crank Use double sided wrench to ensure turning counterclockwise. arm clockwise. pedal is firmly seated against crank arm. Hold pedal with double sided Then finger tighten nut clockwise Remove nut from left pedal by wrench and use single sided wrench back onto pedal bolt. turning clockwise, to tighten nut clockwise.
Screw left pedal onto crank arm counterclockwise, Finger tighten nut counterclockwise back onto pedal bolt. Use double sided wrench to ensure Hold pedal with double sided pedal is firmly seated against crank wrench and use single sided wrench arm. to tighten nut counterclockwise.
Remove the two per-installed Remove the four per-installed Flip mount around to face away screws with included screwdriver screws with screwdriver end of from Connect bike. Hold tablet up from the cover and set aside. hex key and set aside. to mount and hand screw all four screws into tablet. Use screwdriver NOTE: WE RECOMMEND HAVING HELP WITH TABLET INSTALLATION. end of hex key to tighten. Install power cord into DC port. Apply sliding camera cover as screws with included screwdriver. shown above.
Hold water bottle holder against holes at the base of handlebar post frame Plug power adapter into port and attach with screws. Finger tighten screws, then use the screwdriver on located on the rear foot bracket, included hex key to secure. Repeat on opposite side, then plug into wall outlet.
Turn seat slide adjustment knob Turn seat height adjustment lever Pull and hold the seat height counterclockwise to loosen. Move counterclockwise until you are able adjustment lever and raise the seat the seat along track to desired to pull the lever halfway out. to desired position. Turn seat height location. Turn the knob clockwise adjustment lever clockwise until to secure. secure. Turn handlebar adjustment knob counterclockwise until you are able to pull the lever halfway out.
FEDERAL COMMUNICATIONS COMMISSION (FCC) STATEMENT 15.21 YOU ARE CAUTIONED THAT CHANGES OR MODIFICATIONS NOT EXPRESSLY APPROVED BY THE PART RESPONSIBLE FOR COMPLIANCE COULD VOID THE USER'S AUTHORITY TO OPERATE THE EQUIPMENT. THIS EQUIPMENT HAS BEEN TESTED AND FOUND TO COMPLY WITH THE LIMITS FOR A CLASS B DIGITAL DEVICE, PURSUANT TO PART 15 OF THE FCC RULES. THESE LIMITS ARE DESIGNED TO PROVIDE REASONABLE PROTECTION AGAINST HARMFUL INTERFERENCE IN A RESIDENTIAL INSTALLATION.
NOTE: CARE SHOULD BE TAKEN IN MOUNTING AND DISMOUNTING THE STATIONARY EXERCISE BIKE. BEFORE MOUNTING OR DISMOUNTING MOVE THE PEDAL ON THE MOUNTING OR DISMOUNTING SIDE TO ITS LOWEST POSITION AND BRING THE MACHINE TO A COMPLETE STOP. THE MANUFACTURER RECOMMENDS TO PLACE THE ECHELON® CONNECT BIKE IN A SPACE WHERE YOU HAVE TWO FEET OF CLEARANCE ON ALL SIDES OF THE BIKE FOR SAFE MOUNTING AND DISMOUNTING OF THE EXERCISE BIKE. THE MINIMUM DIMENSIONS ARE: 0.5 M (19.7 IN.) ON AT LEAST ONE SIDE, AND 0.5 M {19.7 IN.
appliance should never be left unattended when plugged in. Unplug from outlet when not in use, and before putting on or taking off parts. 2. Do not operate under blanket or pillow. Excessive heating can occur and cause fire, electric shock, or injury to persons. 3.
BEFORE starting any fitness or strength program, consult with your physician or health official. This will ensure that you engage in the proper strength or fitness program for your age and physical condition.
NEVER use the bike if it is not properly/fcompletely assembled or is damaged in any way. » NEVER exceed the weight limit for this bike. The weight limit for this bike is 300 pounds. Do not use the Echelon® Connect if your body weight is in excess of 300 pounds. + NEVER use Echelon® Connect when sick or fatigued. + ALWAYS wear proper attire and footwear that fully covers your feet. Long hair should be tied back or tucked away. Ensure that shoelaces are tucked into your shoes.
ALWAYS ensure that the Echelon® Connect is wiped down after each use to keep it sanitary. « Cleaning and user maintenance shall not be made by children without supervision. If any problems arise affecting the performance of the Echelon® Connect, contact the manufacturer immediately. Always ensure that parts which undergo wear are checked regularly.
Fed instructions MADE IN w] PATENT Before Operating CHINA C € poo Fev 092520 longshoremen Bar vice below. For refunds on items not purchased from Echelon® directly, please contact your retailer. ECHELON® FIT 1-YEAR LIMITED WARRANTY Echslun® warrants iis product to be free of manufacturing defects. Should any auk detect develop of becomes evident within ans year drum the dabs of schuss, Echeian® wil pleonasms the sentient pdt or af Hs option, repel oF replace ha defective pairs) without charge.
