Instruction Manual

i.LON 100 Internet Server Programmer’s Reference 9-5
9.2.1.2 AnalogFBGet
You can use the AnalogFBGet function to retrieve the configuration of any Analog Function
Block that you have added to the i.LON 100. You must reference the Analog Function Block
whose configuration is to be displayed by its index number in the <Data> parameter you
supply to the function, as in the example below.
<Data>
Parameter
<Data>
<iLONAnalogFB>
<AnalogFB>
<UCPTindex>1</UCPTindex>
</AnalogFB>
</iLONAnalogFB>
</Data>
<Result>
Parameter
<Result>
<iLONAnalogFB>
<AnalogFB>
<UCPTindex>1</UCPTindex>
<UCPTlastUpdate>2002-06-02T09:06:36Z</UCPTlastUpdate>
<UCPTdescription>Maximum Temperature</UCPTdescription>
<UCPTfbName>Analog Fn Block- 1</UCPTfbName>
<UCPTcompFunction>FN_GT</UCPTcompFunction>
<UCPTmajorityValue>100</UCPTmajorityValue>
<UCPTtrueThreshold></UCPTtrueThreshold>
<UCPToutputFunction>FN_MAX</UCPToutputFunction>
<SCPTminRnge>10.0</SCPTminRnge>
<SCPTmaxRnge>80.0</SCPTmaxRnge>
<UCPTcalculationInterval>0.0</UCPTcalculationInterval>
<SCPTovrBehave OV_DEFAULT</SCPTovrBehave> >
<SCPTovrValue>0</SCPTovrValue>
<UCPTpollOnResetDelay>0.0</UCPTpollOnResetDelay>
<InputDataPoint>
<Point>
<UCPTindex>0</UCPTindex>
<UCPTpointName>NVL_nviClaValue_1</UCPTpointName>
<UCPTfieldName>value</UCPTfieldName>
<UCPTpollRate>0</UCPTpollRate>
</Point>
<Point>
<UCPTindex>1</UCPTindex>
<UCPTpointName>NVL_nviClaValue_2</UCPTpointName>
<UCPTfieldName>value</UCPTfieldName>
<UCPTpollRate>0</UCPTpollRate>
</Point>
</InputDataPoint>
<CompareDataPoint>
<UCPTpointName>NVL_nvoClsValue_2</UCPTpointName>
<UCPTfieldName>value</UCPTfieldName>
<UCPTpollRate>0</UCPTpollRate>
</CompareDataPoint>
<OutputDataPoint>
<UCPTpointName>NVL_nvoClsValue_1</UCPTpointName>
<UCPTfieldName>value</UCPTfieldName>
</OutputDataPoint>
</AnalogFB>
</iLONAnalogFB>
</Result>