Instruction Manual

10.2.1.2 EventSchedulerGet
You can use the EventSchedulerGet function to return the configuration of any Event
Scheduler that you have added to the i.LON 100. You must reference the Event Scheduler
whose configuration is to be returned by its index number in the <Data> parameter you
supply to the function, as in the example below.
<Data>
<iLONEventScheduler>
<UCPTindex>1</UCPTindex>
</Schedule>
</iLONEventScheduler>
<Result>
Parameter
<Result>
<iLONEventScheduler>
<UCPTindex>1</UCPTindex>
<UCPTlastUpdate>2002-08-26T11:10:34Z</UCPTlastUpdate>
<UCPTfbName>Scheduler- 1</UCPTfbName>
<UCPTscheduleEffectivePeriod>2002-07-07,2002-08-08</UCPTscheduleEffectivePeriod>
<Point>
<UCPTpointName>NVL_nvoWeekday</UCPTpointName>
<SCPTdelayTime>0.0</SCPTdelayTime>
<Data>
Parameter
<Schedule>
</Data>
<Schedule>
<UCPTdescription>Kitchen Schedule</UCPTdescription>
<UCPTindex>0</UCPTindex>
</Point>
<Point>
<UCPTindex>1</UCPTindex>
<UCPTpointName>NVL_nvoWeekend</UCPTpointName>
<SCPTdelayTime>2.0</SCPTdelayTime>
</Point>
<DayBased>
<UCPTindex>0</UCPTindex>
on>
<UCPTpriority>240</UCPTpriority>
<UCPTweekdays>0,1,1,1,1,1,0</UCPTweekdays>
<UCPTindex>0</UCPTindex>
<UCPTscheduleValue WEEKDAY</UCPTscheduleValue>
</DayTimeVal>
</DayBased>
<UCPTindex>1</UCPTindex>
<UCPTdescription>Weekend</UCPTdescription>
<UCPTpriority>240</UCPTpriority>
<UCPTweekdays>1,0,0,0,0,0,1</UCPTweekdays>
<DayTimeVal>
<UCPTindex>0</UCPTindex>
<UCPTscheduleValue>100.0 1</UCPTscheduleValue>
<UCPTdescripti Weekday</UCPTdescription>
<DayTimeVal>
>
<UCPTscheduleTime>0:0</UCPTscheduleTime>
<DayBased>
<UCPTscheduleTime>12:30</UCPTscheduleTime>
</DayTimeVal>
<DayTimeVal>
<UCPTindex>1</UCPTindex>
<UCPTscheduleValue 0.0 0</UCPTscheduleValue> >
<UCPTscheduleTime>10:30</UCPTscheduleTime>
</DayTimeVal>
i.LON 100 Internet Server Program10-6 mer’s Reference