User Manual

Section 1: Setting Up and Using the i.LON 600 Internet Server

Restoring Factory Defaults

When in secure access mode (see the Security Access Reset section later in this chapter),

the Security Web page will display a link to the Restore Factory Defaults Web page.

Click the Restore Factory Defaults button on this page to reset the configuration of the

i.LON 600 to its factory default. This will restore the following i.LON 600 configuration:

Table 7. i.LON 600 Factory Default Settings

FTP user name:

ilon

FTP password:

ilon

Automatically obtain IP address:

false

IP address:

192.168.1.222

Subnet mask:

255.255.255.0

Gateway:

192.168.1.222

Web server port::

FTP server port:

Hostname:

ilon600

SNTP servers:

0.0.0.0

Time zone:

(GMT-08:00) Pacific Time (US &

Canada); Tijuana

LONWORKS/IP port:

1628

LonTalk addresses:

unconfigured

This will restore the IP address back to 192.168.1.222, so you may need to place

your computer on that subnet or use the route command to communicate with the i.LON

600 after the reboot is complete.

i.LON 600 User’s Guide 27