User`s guide
i.LON SmartServer 2.0 Programming Tools User’s Guide  239   
à 
Use i.LON SmartServer 2.0 Programming Tool to 
upload FPM executable module (.app or .drv 
extension) to root/modules/user/<YourCompany> 
folder on SmartServer flash disk. 
Must have FPM license on SmartServer to 
upload FPMs. 
Select Default Web Page check box in 
Deployment Settings window of Install 
FPM Module dialog to create custom 
FPM configuration Web page for FPM 
applications. 
à 
If you are deploying an FPM driver, reboot the 
SmartServer. 
à 
Use SmartServer to verify that a network 
management service has been selected (LNS or 
Standalone). 
If using LNS mode (LNS Auto or LNS 
Manual), FPM devices must have static 
interfaces. 
Must use an LNS mode in order to bind 
data points in your FPM application to 
other data points with L
ONWORKS 
connections. 
Must use Standalone mode if FPM devices 
use dynamic interfaces. 
à 
Use SmartServer to add new internal FPM device on 
L
ONWORKS channel. 
If FPM device has static interface, select 
XIF file from root/lonWorks/Import/ 
<YourCompany> folder. 
If FPM device has dynamic interface, 
select v40 XIF file from 
root/lonworks/import/Echelon/iLON100 
folder. 
à 
If FPM device has dynamic interface, add functional 
block to device based on UFPT used by FPM. 
à 
If binding FPM data points with L
ONWORKS 
connections, commission FPM device using 
SmartServer or LonMaker tool 
Can commission device from SmartServer 
tree or LNS tree in SmartServer Web 
interface. 
Once FPM device is commissioned in the 
LonMaker tool, cannot use the 
SmartServer to decommission the device 
or set the device application offline. 
Can only use the LonMaker tool to 
decommission and re-commission the 
device and set the device application 
online or offline. 
à 
Test FPM application with View – Data Points Web 
page in SmartServer Web interface. 
à 
Connect FPM data points with LONWORKS 
connections or Web connections. 
Can create LonWorks connections with 
LNS tree in SmartServer Web interface or 
the LonMaker tool. 
Can create Web connections with 
SmartServer tree in SmartServer Web 
interface 










