User guide

8 Using the Mini FX/PL Example Applications

Figure 1.4 Mini FX Application—Service Pin Message Dialog

The Neuron ID is a unique 48-bit (12-hex digit) identifier contained in every

ONWORKS device. The Mini kit uses the Neuron ID to communicate with your

selected device. For more information on Neuron IDs, see the Introduction to the

ONWORKS System document in the Echelon Mini FX program folder.

The Program ID is a unique, 16-hex digit ID that uniquely identifies the device

application.

8. Click Yes to register the device with the Mini FX Application.

9. The PL 3150/PL 3170 EVB device is added to the Device list, which includes devices

that you have added. The device will remain in the Device list until you close the

Mini FX Application, or connect to a new network interface. You will need to add the

device again when you restart the Mini FX Application, or when you connect to a

different network interface.

10. In the Application Image property, click Add, browse to the

ONWORKS\NeuronC\Examples\Mini EVB\ReleasedBinaries folder, and then

select the desired Neuron C application image file (.ndl extension). The application

image is added to the list of those recently added and it will remain there even after

you close the Mini kit.