Manual

50 Functions
Function Description
memset( ) Set a block of memory to a specified
value:
 length greater than or equal to
256 bytes
 others
retrieve_status( ) Read statistics from protocol processor
service_pin_msg_send( ) Send a service pin message
service_pin_state( ) Read the service pin state
set_bit( ) Set a bit in a bit array
set_eeprom_lock( ) Set the state of the checksummed
EEPROM's lock
tst_bit( ) Return TRUE if bit tested was set
Input/Output
Table 12 lists the I/O functions.
Table 12. Input/Output Functions
Function Description
io_change_init( ) Initialize reference value for
io_changes event
io_edgelog_preload( ) Define maximum value for edgelog
period measurements
io_edgelog_single_preload( ) Define maximum value for edgelog
single_tc period measurements
io_idis( ) Disable the I/O interrupt used in the
hardware support for the sci and spi
I/O objects
io_iena( ) Enable the I/O interrupt used in the
hardware support for the sci and spi
I/O objects