User`s guide

3-6 Configuring and Testing the PCLTA-20 Card
Enable PC Card Reset
This control is not used with the PCLTA-20 card. It is provided for owners of the
PCC-10 PC Card (PCMCIA card) and controls whether the hardware reset line is
enabled. The state of this checkbox is irrelevant to the operation of the PCLTA-20
card.
PCLTA-20 Diagnostics
A number of diagnostic and testing services are provided by the PCLTA-20 control
panel application. Clicking the Diagnostics button in the main control panel window
displays the PCLTA-20 Diagnostics dialog. This dialog contains buttons for the
diagnostic commands and displays the version number and current status of the
PCLTA-20 device driver. If no PCLTA-20 card is installed in a PCI-bus slot, the
Diagnostics window will display “(no driver found)”.
LonWorks® PCC10/PCLTA10/PCLTA20 Device Driver
Version: 1.25
Card Type: PCLTA-20
Driver Status:
Number of Free LTA Output Buffers-
Non-Priority: 3, P riority: 3
Loaded Image S ize: 49408
Interrupt Count: 4
Figure 3.5 PCLTA-20 Diagnostics Dialog Box
Driver Status
The content of the device driver status displayed in the Diagnostics window is as
follows:
• Number of Free PCLTA-20 Output Buffers:
Non-Priority: the non-priority application output buffer count, as calculated by
the driver based on information retrieved from the PCLTA-20 card’s non-
volatile EEPROM.