User`s guide

Figure 11.3 DOS Virtual Device Driver Configuration Screen
Reboot the PC after installing the SLTA-10 driver software.
SLTALin k Manager
The SLTALink Manager software provides the interface to setup the SLTA-10 for
different modes of operation. The remote PC is assumed to have the network
database required for the connection application. The LonMaker for Windows tool is
assumed for this example.
The SLTALink Manager (s 1 t al ink. exe) launches automatically from the
Start.Programs.Startup folder when Windows boots up. The SLTALink Manager must
be running prior to accessing the SLTA-10 from LonMaker for Windows tool, The
SLTALink Manager application does not appear as a button on the taskbar, but it does
present an icon in the notification section of the taskbar as shown in figure 11.4.
SLTALink Manager Icon
Figure 11.4 Taskbar with SLTALink Manager Running
To configure the SLTA-10 and modem for remote dial-in access, follow these steps:
1. Temporarily connect the serial port of the host PC directly to the SLTA-10.
2. Click on the SLTALink Manager icon found in the notification section of the
taskbar (figure 11-5).
SLTA-10 Adapter User’s Guide
11-21