User`s guide

Figure 11.5

SLTALink Manager Application Screen

Confirm that the left panel of the SLTALink status bar shows the ‘Local

SLTA-10’. If not, then click on the

Link. Select>

menu to select the Local

SLTA-10.

Click on the

Manual Connect Link

speed button (left-most button on the

toolbar) to establish a connection to the local SLTA-10. A successful

connection will immediately be reported in trace frame of the SLTALink

Manager. If the application requires only a dial-in from a remote SLTA-10

to a host PC, then the main configuration concern is the password used to

gain access to the SLTA-10 remotely. Use the

Device. Conf igure SLTA...

dialog to set the password used to control access to the SLTA-10 (figure 6).

Figure 11.6 showsa

Password,

with

Clear EE Pool on Apply

selected,

and

Auto-dialout

options not selected. When

Apply

button is clicked,

the SLTA-10 connected to the PC updates with the new configuration

information.

1 l-22

Using the SLTA-10 Adapter with a Modem