User`s guide

AT!-ATE WOK1 &D2SO=l MOLO
Figure 11 .l SLTA-10 Configuration Dialog Setup for Remote Dial-ins
5. The SLTA-10 can now be tested by running the LonMaker for Windows tool
and selecting SLTALONl to make the current active local SLTA-10 be the
network interface. In the LonMaker for Windows tool, the
LonMaker . Status
Sumary... command will provide a quick confirmation
that the SLTA-10 functions properly and can reach all devices in the target
network. Once the operation of the SLTA-10 has been established, shut
down the LonMaker for Windows tool and manually disconnect the local
SLTA-10 using the SLTALink Manager.
6. Connect the proper null modem cable between the SLTA-10 and the modem
and verify that both devices are powered.
7. From SLTALink Manager, use the Link. New... command to define the
remote connection description. See figures 11.7 through 11.9.
SLTA-10 Adapter User’s Guide
1 l-23