User`s guide

In tetface
I
Function
Connecting Power
Once the SLTA-10 Adapter is physically attached to the desired channel, power must
be supplied via one of the power input connectors. The SLTA-10 Adapter may be
ordered with a plug-in power supply, or may be used with any 9 - 3OVACpDC supply.
Four plug-in power supply options are available for the SLTA-10 Adapter, depending
on the country in which the SLTA-10 Adapter is used: USA/Canada, United
Kingdom, Continental Europe, or Japan. The output voltage of these supplies is a
nominal +SVDC at 5OOmA. Power consumption is typically cl Watt, independent of
input voltage.
Table 2.2 describes the basic characteristics of the four power supply types.
Table 2.2 Power Supply Characteristics
Country or Nominal
lnpu t range
Frequency Input Connector Echelon
Region Input
nominal 210%
Model #
Voltage
USA/Canada 120 VAC
108-l 32 VAC
60 Hz 2-prong, NEMA 1-15P 78010
Continental
230 VAC
207-253 VAC
50 Hz
2-prong, Euro Plug 78020
Europe
U.K.
230 VAC
207-253 VAC
50 Hz
3-prong, U.K. Plug 78030
Japan
100 VAC
90- 110VAC
50/60 Hz 2-prong, NEMA l-15P 78040
2-6
SLTA-10 Adapter Hardware
Unregulated
AC/DC Power Input
Two-Position
Black connector for the power input. The
mating plug (provided) is Weidmiiller PN
125911.
Unregulated
AC/DC Power Input
Barrel Connector
Female 2.1 mm inside diameter and 5.5 mm
outside diameter barrel input connector. For
use with Echelon power supplies, models
78010,78020,78030, and 78040.
( J2
I
Power Indicator LED
DS2
(Green LED) Indicates presence of input
power to the SLTA-10 Adapter.