User`s guide

For the Windows 95198 or NT network driver, there is no /B option. When using
these drivers, the serial bit rate is configured using the SLTALink Manager as
explained in Chapter 7.
I
115,200 bps
57,600 bps
(default)
38,400 bps
19,200 bps
9600 bps
2400 bps
1200 bps
300 bps
Figure 4.7 SLTA-10 Adapter Serial Baud Rate Switches 6, 7, and 8 / BAUD[2..0]
Table 4.2 SLTA-10 Adapter Autobaud Switch Configuration
Autobaud
BAUD
‘ /A ’ Option on ‘/B ’ Option on DOS
Switch
Switches
DOS Driver
Driver
down
Specifies actual
Don’t care Specifies actual serial bit
position
baud rate
rate. Must match switch-
selected baud rate
up
Don’t care
Must be specified Specifies actual baud rate
position 1
I
I I
SLTA-10 Adapter User’s Guide
4-7