User`s guide

%RESULT%
Expands to an unquoted word that represents the success or fail
reason of the connection.
The startup application will be launched when a dial-in occurs for this link, or
optionally, when a manual connection is made to the link.
It will not start up if the
link is connected to due to an “auto-connect” case.
Enabling a Callback
If a remote SLTA-10 adapter has callback enabled then it will expect a callback
command whenever someone dials in to it.
Check the Enable box if you need to
enable the callback feature.
The callback command includes a directory index that points to a phone number
stored in the remote SLTA-10 adapter.
If callback is enabled then one of the remote
directory numbers (“Address 1” though “Address 5”) can be selected to be used to call
the host back.
See Characteristics of a Well-Designed System below for a description of how to
successfully implement callback.
Configuration
Use the following screen to configure your SLTA-10 Adapter.
Figure 7.9 Configuration Screen
7-10
SLTA-10 NSI Mode Software