Specifications

07/02/01
3-18
WESTGEO: This sentence complies with the requirements of the current WG-1100
velocimeter output string.
634 01503
635 01503
636 01504
The string is composed of a 3-digit sequential event number, followed by a space,
and then 5 characters of velocity data. Each record is delimited by a <CR><LF>.
Sounder: When the Sounder output string is selected, the Digibar sends a <CTRL>A
followed by "Digibar Pro 9999 (Serial No.) 11/08/99 10:45:20 AvgVel 1500.2
(m/s, f/s) MaxDepth 100 (m or ft.).<CTRL>D. NOTE: See annotating the Echo
Sounder chart automatically in a later section.
Hypack: Selection of the Hypack SV Format causes the Digibar Pro to output a
header: FTP New followed by the cast data in two columns (depth velocity). All
velocity values are in meters/second.
FTP New
002.5 1500.0
003.0 1503.1
003.5 1503.2
Comm Menu
Output During: In the majority of operating circumstances, the Hand-held control unit will
not be connected directly to a computer or other logging device. It will simply be
used as designed as a portable, completely self-contained profiling system. However,
the option does exist for echoing the data out the serial port for logging on both the
Output Cast All
1,2,etc.
Output Type CSV
SVP16
NMEA
WGEO
HYPACK
SOUNDER
Output During No
Yes
Baud rate 19200
9600
4800
Test PC
Test probe