SDS

SAFETY DATA SHEET-
FRSM5075 2-CYCLE ENGINE OIL
Polyisobutylene
9003-29-6
500-004-7
15-35
Residual oils (petroleum),
64742-01-4
265-101-6
<5
solvent refined
Solvent-dewaxed heavy
64742-65-0
265-169-7
10-30
paraffinic distillates (petroleum)
Distillates (petroleum),
64742-47-8
265-149-8
15-35
hydrotreated light
4. FIRST AID MEASURES
4.1.
Skin:
Wash with plenty of water. If irritation occurs: Get medical advice/attention. Take off
contaminated clothing and wash it before reuse.
Eye:
Rinse cautiously with water for several minutes. Remove contact lenses, if present and
easy to do. Continue rinsing. If eye irritation persists: Get medical advice/attention.
Inhalation:
Remove person to fresh air and keep comfortable for breathing. Call a poison
center/doctor if you feel unwell.
Ingestion:
If ingested, do not induce vomiting. Aspiration hazard. Call a physician.
5. FIRE FIGHTING MEASURES
5.1. Flash Point: 163.4°F (73°C)
5.2. Protective Equipment/Fire Fighting Instructions:
5.2.1.1. For fires involving this material, do not enter any enclosed or confined fire space without proper
protective equipment, including self-contained breathing apparatus. Wear protective gloves/eye
protection/face protection.
5.3. Extinguishing Media:
5.3.1. Use water fog, foam, dry chemical or carbon dioxide (CO
2
) to extinguish flames.
5.4. Special Firefighting Procedures:
5.4.1. Cool exposed containers with water spray.
5.5. Unusual Fire and Explosion Hazards:
5.5.1. Pressure increase in over heated closed containers. Cool containers with water spray.
6. ACCIDENTAL RELEASE MEASURES
6.1. Spill Procedures:
6.1.1. Remove ignition sources. Recover Liquid. Add absorbent to spill area. Ventilate confined spaces. Advise
authorities if product enters sewers, etc.
6.2. Waste Disposal:
Page 3 of 8