Instruction v.2 User Manual

Instruction Sheet
Instructions
SUBJECT: DISCHARGE CHUTE
LOCK UPGRADE
MODELS: 74624(S), 74628(S)
DISCHARGE CHUTE LOCK UPGRADE
PARTS
Figure 1 - Discharge Chute Crank and Lock Assembly.
ASSEMBLY, DISCHARGE ROTATOR (75009-00)
ITEM PART NUMBER DESCRIPTION QTY
1 12620 SPRING, CONTROL BAR 1
2 14076-00 GRIP, CLUTCH HANDLE 1
3 15003 BOLT, 5/16" X 3/4" HHCS GR5 ZP 8
4 15006 BOLT, 3/8" X 1" HHCS GR5 ZP 4
5 15007 BOLT, 3/8" X 1-1/2" HHCS GR5 ZP 1
6 15030 WASHER, 1/4" FLAT ZP 4
7 15031 WASHER, 3/8" FLAT ZP 6
8 15239
BOLT, 1/4" X 1" CARRIAGE NC
GR5 ZP
4
9 15250 WASHER, 5/16" FLAT ZP 8
10 15332
SCREW, 1/4"-20 X 1/4" KNR CUP
SKT SET
2
11 15355 NUT, 1/4" NE NYLOCK ZP 4
12 15356 NUT, 5/16" NE NYLOCK ZP 4
13 15388 NUT, 3/8" NE NYLOCK ZP 1
14 15432 KEY, 3/16" SQUARE X 3/4" PLAIN 1
15 16576 SPROCKET, 40B9 1
16 17897
BEARING, SIDE FLANGE
MOUNT, 5/8"
2
17 72229-12 TUBE, CASTOR 1
18 74087-00 HANDLE, CHUTE ROTATOR 1
19 75004-12 WELDMENT, BOTTOM ROTATOR 1
20 75007-12 WELDMENT, ROTATOR COVER 1
21 75008-00 GUIDE, UHMW CHAIN 2
22 75010-12 STOP, DISCHARGE ROTATOR 1
23 75032-00 TUBE, 7/8" O.D. X 5/8" ID X .25" 1
2
20
9
3
5
7
1
22
7
13
11
6
21
10
19
16
8
3
9
14
7
4
18
12
17
15
23
Lock Assembly.
Crank Assembly.
PN 75051-00
Rev 091708
WARNING
BEFORE INSPECTING OR SERVICING ANY PART OF
T H I S M A C H I N E , S H U T O F F P O W E R S O U R C E ,
DISCONNECT SPARK PLUG WIRE FROM SPARK PLUG AND
MAKE SURE ALL MOVING PARTS HAVE COME TO A COMPLETE
STOP.
NOTE
THE NEW DISCHARGE CHUTE LOCK UPGRADE KIT COMES
FULLY ASSEMBLED. THERE IS SOME DISASSEMBLY
REQUIRED BEFORE INSTALLING (SEE INSTALLATION
DIRECTIONS).