Owners Manual v.1

Page 76” Chipper Pro Operator’s Manual
2.4 BOLT TORQUE
CHECKING BOLT TORQUE:
The table shown below is for reference purposes only and its use by anyone is entirely voluntary, unless otherwise noted.
Reliance on its contents for any purpose is at the sole risk of that person. BearCat Co. is not responsible for any loss claim
or damage arising there from. In developing these tables, BearCat has made a determined effort to present the contents
accurately.
Torque figures indicated above are valid for non-greased or non-oiled threads and heads unless otherwise specified. Therefore, do not grease or
oil bolts or capscrews unless otherwise specified in this manual. When using locking elements, increase torque values by 5%.
* Torque value for bolts and capscrews are identified by their head markings.
N.m Ft-lb N.m Ft-lb N.m Ft-lb N.m Ft-lb
M30.50.4 - - - - - -
M432.2 - - - - - -
M554 - - - - - -
M6 6 4.5 11 8.5 17 12 19 14.5
M8 15 11 28 20 40 30 47 35
M102921554080609570
M1250379570140105165120
M14 80 60 150 110 225 165 260 190
M16 125 92 240 175 350 255 400 300
M18 175 125 330 250 475 350 560 410
M20 240 180 475 350 675 500 800 580
M22 330 250 650 475 925 675 1075 800
M24 425 310 825 600 1150 850 1350 1000
M27 625 450 1200 875 1700 1250 2000 1500
12.9
Bolt Torque*
METRIC TORQUE SPECIFICATION
Bolt
Diameter
"A"
4.8 8.8 10.9
N.m Ft-lb N.m Ft-lb N.m Ft-lb
1/4" 7.5 5.5 11 8 16 12
5/16"151123173425
3/8" 27 20 41 30 61 45
7/16"413068509570
1/2" 68 50 102 75 149 110
9/16" 97 70 149 110 203 150
5/8" 122 90 203 150 312 230
3/4" 217 160 353 260 515 380
7/8" 230 170 542 400 814 600
1" 298 220 786 580 1220 900
1-1/8" 407 300 1085 800 1736 1280
1-1/4" 570 420 2631 1940 2468 1820
ENGLISH TORQUE SPECIFICATION
Bolt
Diameter
"A"
Bolt Torque* (UNC)
SAE 2 SAE 5 SAE 8
SAE - 8SAE - 2
A
SAE - 5
A
Assembly