SDS

Product Name: ECHO RED ARMOR LUBRICANT
Revision Date: 2July2019
Page 2 of 8
SECTION 3
COMPOSITION/INFORMATION ON INGREDIENTS
Reportable Hazardous Substance(s) or Complex Substance(s)
SECTION 4
FIRST AID MEASURES
INHALATION
Under normal conditions of intended use, this material is not expected to be an inhalation hazard.
SKIN CONTACT
First aid is normally not required. Seek medical attention if discomfort occurs.
If product is INJECTED INTO OR UNDER THE SKIN, or into any part of the body, regardless of the
appearance of the wound or its size, the individual should be evaluated immediately by a physician as a
surgical emergency. Even though initial symptoms from high pressure injection may be minimal or absent,
early surgical treatment within the first few hours may significantly reduce the ultimate extent of injury.
EYE CONTACT
Flush thoroughly with water. If irritation occurs, get medical assistance.
INGESTION
First aid is normally not required. Seek medical attention if discomfort occurs.
SECTION 5
FIRE FIGHTING MEASURES
EXTINGUISHING MEDIA
Appropriate Extinguishing Media: Use water fog, foam, dry chemical or carbon dioxide (CO2) to
extinguish flames.
Inappropriate Extinguishing Media: Straight Streams of Water
FIRE FIGHTING
Fire Fighting Instructions: Evacuate area. Prevent runoff from fire control or dilution from entering
streams, sewers, or drinking water supply. Firefighters should use standard protective equipment and in
enclosed spaces, self-contained breathing apparatus (SCBA). Use water spray to cool fire exposed surfaces
and to protect personnel.
Hazardous Combustion Products: Aldehydes, Smoke, Fume, Sulfur oxides, Incomplete combustion
products, Oxides of carbon
FLAMMABILITY PROPERTIES
Flash Point [Method]: >232°C (450°F) [ EST. FOR OIL, ASTM D-92 (COC)]
Flammable Limits (Approximate volume % in air): LEL: N/D UEL: N/D
Autoignition Temperature: N/D
Name
CAS#
Concentration
LUBRICATING GREASE, COMPLEX COMBINATION OF
OILS (PETROLEUM), C20-50, HYDROTREATED,
NEUTRAL OIL-BASED CONTAINING ORGANIC SALTS OF
LITHIUM ALKALI METALS
74869-21-9
90 to 98%
ZINC DIAMYLDITHIOCARBAMATE
15337-18-5
0.5 to 2%
PHOSPHORIRDITHIOIC ACID, MIXED 0,0-BIS(ISOBUTYL)
AND PENTYL) ESTERS, ZINC SALTS
68457-79-4
0.5 to 2%