SDS

Product Name: ECHO RED ARMOR LUBRICANT
Revision Date: 2July2019
Page 5 of 8
Vapor Density (Air = 1): < 1 mm
Vapor Pressure: < 1mm
Evaporation Rate (n-butyl acetate = 1): N/D
pH: N/A
Log Pow (n-Octanol/Water Partition Coefficient): NE5
Solubility in Water: Negligible
Viscosity: solid, base oil viscosity 340 cSt (340 mm2/sec) at 40°C
Oxidizing Properties: See Sections 3, 15, 16.
OTHER INFORMATION
Freezing Point: N/D
Melting Point: N/D
DMSO Extract (mineral oil only), IP-346: < 3 %wt
NOTE: Most physical properties above are for the oil component in the material.
SECTION 10
STABILITY AND REACTIVITY
STABILITY: Material is stable under normal conditions.
CONDITIONS TO AVOID: Excessive heat. High energy sources of ignition.
MATERIALS TO AVOID: Strong oxidizers
HAZARDOUS DECOMPOSITION PRODUCTS: Material does not decompose at ambient temperatures.
HAZARDOUS POLYMERIZATION: Will not occur.
SECTION 11
TOXICOLOGICAL INFORMATION
Route of Exposure
Conclusion / Remarks
Skin
Toxicity (Rabbit): LD50 > 2000 mg/kg
Minimally Toxic. Based on test data for structurally similar
materials.
Irritation (Rabbit) Data available.
Negligible irritation to skin at ambient temperatures. Based on
assessment of the components.
Eye
Irritation (Rabbit): Data available.
May cause mild, short-lasting discomfort to eyes. Based on
assessment of the components.
CHRONIC/OTHER EFFECTS
Contains:
Base oil severely refined: Not carcinogenic in animal studies. Representative material passes IP-346,
Modified Ames test, and/or other screening tests. Dermal and inhalation studies showed minimal effects;
lung non-specific infiltration of immune cells, oil deposition and minimal granuloma formation. Not sensitizing
in test animals.
The following ingredients are cited on the lists below: None.
--REGULATORY LISTS SEARCHED--
1 = NTP CARC
3 = IARC 1
5 = IARC 2B
2 = NTP SUS
4 = IARC 2A
6 = OSHA CARC