X7722271404 / X772000164 99944200485 Shaft Hedge Clipper Attachment FOR MODELS: SRM-2100SB, 2400SB, 210SB, 211SB, 225SB, 260SB, 261SB, PAS-2100, 2400, 2601, 210, 211, 225, 225VP, 225VPB, 230, 231, 260, 261, 265, 266 (NOT FOR USE ON PAS-280) Operator’s Manual Users of this equipment risk injury to themselves and others if the unit is used improperly and/or safety precautions are not followed. ECHO provides an operator’s manual and a safety manual.
TABLE OF CONTENTS 99944200485 TABLE OF CONTENTS Table of Contents .............................................................................................................................. 2 Introduction ........................................................................................................................................ 3 The Operator’s Manual ................................................................................................................ 3 The Safety Manual.........
99944200485 INTRODUCTION INTRODUCTION Welcome to the ECHO family. This ECHO product was designed and manufactured to provide long life and on-the-job dependability. Read and understand this manual and the SAFETY MANUAL. You will find both easy to use and full of helpful operating tips and SAFETY messages. The Operator’s Manual Keep it in a safe place for future reference. Contains specifications and information for safety, operation, maintenance, storage and assembly specific to this product.
SAFETY 99944200485 Additional or Replacement Manuals Replacement Operator, Safety Manuals, and Parts Catalogs are available from your ECHO dealer or at www.echo-usa.com or by contacting ECHO Inc., 400 Oakwood Road, Lake Zurich, IL 60047 (800-673-1558). Always check the ECHO Web Site for updated information. Safety Videos are available from your Echo dealer. A $5.00 shipping charge will be required for each video.
99944200485 SAFETY International Symbols Symbol Description Symbol Description Symbol Description Symbol Description Warning, See Operator’s Manual Safety/Alert DO NOT USE BLADES - Line Head Only Wear eye, ear and head protection Finger Severing Plan retreat pathfromfalling objects Wear hand and foot protection Rotating Cutting Attachment AVOID KICKOUT. Keep bystanders at least 15 meters (50 feet) away.
SAFETY 99944200485 Hearing Protection ECHO recommends wearing hearing protection whenever unit is used. Proper Clothing Wear snug fitting, durable clothing; • Pants should have long legs, shirts with long sleeves. • DO NOT WEAR SHORTS, • DO NOT WEAR TIES, SCARVES, JEWELRY, or clothing with loose or hanging items that could become entangled in moving parts or surrounding growth. Wear sturdy work shoes with nonskid soles; • DO NOT WEAR OPEN TOED SHOES, • DO NOT OPERATE UNIT BAREFOOTED.
99944200485 SAFETY Repetitive Stress Injuries It is believed that overusing the muscles and tendons of the fingers, hands, arms, and shoulders may cause soreness, swelling, numbness, weakness, and extreme pain in those areas. Certain repetitive hand activities may put you at a high risk for developing a Repetitive Stress Injury (RSI). An extreme RSI condition is Carpal Tunnel Syndrome (CTS), which could occur when your wrist swells and squeezes a vital nerve that runs through the area.
SAFETY 99944200485 Keep a Solid Stance • Maintain footing and balance at all times. Do not stand on slippery, uneven or unstable surfaces. Do not work in odd positions or on ladders. Do not over reach. Avoid Hot Surfaces • During operation, the drive shaft housing and attachment bearing housing may become very hot, too hot to touch. Avoid contact during and immediately after operation. Equipment Use this attachment with ECHO approved models only.
9944200485 DESCRIPTION DESCRIPTION Locate the safety decal(s) on your unit. Make sure the decal(s) is legible and that you understand and follow the instructions on it. If a decal cannot be read, a new one can be ordered from your ECHO dealer. See PARTS ORDERING instructions for specific information. 1 2 3 4 5 6 1. BLADES - Double reciprocating blades mounted to a blade support bar. Double sided blades, are capable of cutting on either side. 2.
CONTENTS 99944200485 CONTENTS After opening the carton, check for damage. Immediately notify your retailer or ECHO Dealer of damaged or missingparts. Use the contents list to check for missing parts. ____ 1 - Shaft Hedge Clipper Attachment ____ 1 - Operator's Manual X7722271404 / X772000164 99944200485 Shaft Hedge Clipper Attachment ____ 1 - Safety Manual Operator’s Manual ____ 1 - Warranty Registration Card Burn Hazard The muffler or catalytic muffler and surrounding cover may become extremely hot.
99944200485 ASSEMBLY ASSEMBLY Power Head Shaft/Lower Shaft Assembly Do not perform maintenance or assembly procedures with engine running. Parts Required: PAS or SRM-SB Power Head w/Shaft & Coupling 1. Set Power Head/Shaft Assembly on a level surface. B 2. Pull locator pin (A) out, and turn counter-clockwise 1/4 turn to lock-out position. D 3. Remove vinyl cap from attachment drive shaft. 4. Remove cardboard spacer, if necessary. 5.
ASSEMBLY 99944200485 1. Remove front handle assembly, barrier bar (if installed), and mounting hardware from PAS or SRM-SB power head. 2. Retain parts for future use. 12 X7702091904 © 08/2013 ECHO Inc.
99944200485 OPERATION OPERATION Moving parts can amputate fingers or cause severe injuries. Keep hands, clothing and loose objects away from all openings. Always stop engine, disconnect spark plug, and make sure all moving parts have come to a completestop before removing obstructions, clearing debris, or servicing unit. Allow unit to cool before performing service. Hedge Trimming Engine exhaust IS HOT, and contains Carbon Monoxide (CO), a poison gas.
MAINTENANCE 99944200485 MAINTENANCE Moving parts can amputate fingers or cause severe injuries. Keep hands, clothing and loose objects away from all openings. Always stop engine, disconnect spark plug, and make sure all moving parts have come to a complete stop before removing obstructions, clearing debris, or servicing unit. Allow unit to cool before performing service. Wear gloves to protect hands from sharp edges and hot surfaces.
99944200485 MAINTENANCE 1. Brush loose debris from blade and coat both sides of blade with the 50-50 cleaning mixture. 2. Allow cleaning mixture to soften the remaining gummy residue then wipe it from the blade. 3. Apply clean oil to the entire length of the blade. Be certain the blade bolts are lubricated. 4. Wipe excess oil from the blade before putting the unit back in service. Gear Housing Assembly Level 1. Parts Required: POWER BLENDXTM 14 oz. or Lithium Base Grease. 1.
MAINTENANCE 99944200485 4. Slide Gear Housing Assembly onto Drive Shaft. Be certain the Flex Drive Shaft engages the hole in Driver Gear.. C Flat edge of washers (D) must be against drive shaft. 5. Align locating hole in gear housing with locator hole in drive shaft. A 6. Install locating screw (A). Tighten clamping screw (B). B D Sharpening Blades Blades should only be removed and reinstalled by an Authorized ECHO Servicing Dealer, otherwise premature wear or internal damage may occur. Level 2.
99944200485 3. Slide blades to allow file clearance using slots (A) on bottom of blade. Do not pry against cutting edges.. 6 mm (.25 in.) radius 4. File each edge carefully. Follow the original shape of the blade. If a power grinder is used DO NOT allow blade to over heat. 45o 5. Lubricate blades (see “Lubrication”). Blades should only be removed and reinstalled by an Authorized ECHO Servicing Dealer, otherwise premature wear or internal damage may occur. Blade Adjustment Level 2.
STORAGE 99944200485 STORAGE Always install blade cover when transporting or storing unit. 1. Clean and lubricate cutting blades and gear case. 2. Sharpen cutting blades as required. 3. Apply a light coating of clean 20W engine oil along entire length of blades and on blade bolts. 4. Install blade cover onto hedge clipper cutting blades. 5. Store hedge clipper attachment in a dry, dust free place out of the reach of children, using supplied storage hook. Storage Hook Installation 1.
99944200485 SPECIFICATIONS SPECIFICATIONS MODEL 99944200485 Length 1250 mm (49.21 in.) Width 83 mm (3.23 in.) Weight 2.12 kg (4.68 lb.) Gear Case 4.27:1 Cutter Double Reciprocating Blade - Double Edge Effective Length 502 mm (19.76 in.) Pitch 35 mm (1.4 in.) Maximum Cut Soft Materials 25.4 mm (1 in.) Diameter Woody Materials 13 mm (1/2 in.) Diameter X7702091904 © 08/2013 ECHO Inc.
WARRANTY STATEMENTS 99944200485 WARRANTY STATEMENTS ECHO LIMITED WARRANTY STATEMENT FOR PRODUCT SOLD IN USA AND CANADA BEGINNING 01/01/2010 ECHO'S RESPONSIBILITY ECHO Incorporated’s Limited Warranty, provides to the original purchaser that this ECHO product is free from defects in material and workmanship.
99944200485 WARRANTY STATEMENTS PURCHASED REPAIR PARTS, SHORT BLOCKS AND ACCESSORIES & GJ* * & ^J* ATTENTION TWO-STROKE ENGINE POWER PRODUCT OWNERS This ECHO two-stroke engine power product is a quality-engineered unit which has been manufactured to exact tolerances to provide superior performance.
NOTES 99944200485 NOTES 22 X7702091904 © 08/2013 ECHO Inc.
99944200485 X7702091904 © 08/2013 ECHO Inc.
S07100001001/S07100999999 24
