99944200540 Trimmer Attachment FOR MODELS: SRM-2100SB, 2400SB, 210SB, 211SB, 225SB, 260SB, 261SB, PAS-2100, 2400, 2601, 210, 211, 225, 225VP, 225VPB, 230, 231, 260, 261, 265, 266, 280 Operator’s Manual Users of this equipment risk injury to themselves and others if the unit is used improperly and/or safety precautions are not followed. ECHO provides an operator’s manual. It must be read and understood for proper and safe operation. Failure to do so could result in serious injury.
TABLE OF CONTENTS 99944200540 TABLE OF CONTENTS Table of Contents .............................................................................................. 2 Introduction ....................................................................................................... 3 The Operator’s Manual .............................................................................. 3 The Safety Manual.....................................................................................
99944200540 INTRODUCTION INTRODUCTION Welcome to the ECHO family. This ECHO product was designed and manufactured to provide long life and on-the-job dependability. Read and understand this manual and the SAFETY MANUAL. You will find both easy to use and full of helpful operating tips and SAFETY messages. The Operator’s Manual Keep it in a safe place for future reference. Contains specifications and information for safety, operation, maintenance, storage and assembly specific to this product.
SAFETY 99944200540 Echo Consumer Product Support If you require assistance or have questions concerning the application, operation or maintenance of this product you may call the ECHO Consumer Product Support Department at 1-800-673-1558 from 8:00 am to 5:00 pm (Central Standard Time) Monday through Friday. Before calling, please know the model and serial number of your unit.
99944200540 SAFETY The safety alert symbol accompanied by the word “WARNING” calls attention to an act or condition which CAN lead to serious personal injury or death if not avoided. The safety alert symbol accompanied by the word “CAUTION” calls attention to an act or condition which may lead to minor or moderate personal injury if not avoided. The enclosed message provides information necessary for the protection of the unit.
SAFETY 99944200540 Symbol Description Symbol Description Do not operate closer than 15 M (50 ft.) from electrical hazards. Keep bystanders at least 15 meters (50 feet) away Keep feet away from blade DO NOT USE BLADES - Line Head Only Plan retreat path from falling objects Thrown objects Hot Surface AVOID KICKOUT. Keep bystanders at least 15 meters (50 feet) away. Beware Thrown Objects Wear Eye Protection Keep bystanders and helpers away 15 m (50 ft.).
99944200540 SAFETY Operate unit only if you are physically and mentally well. Eye Protection ◆ ◆ Eye protection that meets ANSI Z87.1 or CE requirements must be worn whenever you operate the unit. For additional safety, a full-face shield may be worn over safety glasses or goggles to provide protection from sharp branches or flying debris. Hand Protection Wear sturdy, no-slip, rubber work gloves to improve your grip on the handles.
SAFETY 99944200540 Heavy protective clothing can increase operator fatigue, which may lead to heat stroke. Schedule heavy work for early morning or late afternoon hours when temperatures are cooler. The components of this machine generate an electromagnetic field during operation, which may interfere with some pacemakers. To reduce the risk of serious or fatal injury, persons with pacemakers should consult with their physician and the pacemaker manufacturer before operating this machine.
9944200540 SAFETY Repetitive Stress Injuries (RSI) It is believed that overusing the muscles and tendons of the fingers, hands, arms, and shoulders may cause soreness, swelling, numbness, weakness, and extreme pain in those areas. Certain repetitive hand activities may put you at a high risk for developing a Repetitive Stress Injury (RSI). An extreme RSI condition is Carpal Tunnel Syndrome (CTS), which could occur when your wrist swells and squeezes a vital nerve that runs through the area.
SAFETY 99944200540 Clear the Work Area • Spectators and fellow workers must be warned, and children and animals prevented from coming nearer than 15 m (50 ft.) while the unit is in use. Keep a Firm Grip • Always hold throttle handle and support handle with thumbs and fingers tightly encircling the handles. Keep a Solid Stance • Maintain footing and balance at all times. Do not stand on slippery, uneven or unstable surfaces. Do not work in odd positions or on ladders. Do not over reach.
99944200540 ◆ ◆ ◆ DESCRIPTION ALWAYS stop engine, disconnect spark plug, and make sure all moving parts have come to a complete stop before removing obstructions, clearing debris, or servicing unit. DO NOT start or operate unit unless all guards and protective covers are properly assembled to unit. NEVER reach into any opening while the engine is running. Moving parts may not be visible through openings. DESCRIPTION Locate the safety decal(s) on your unit.
CONTENTS 99944200540 2. NYLON CUTTING ATTACHMENT - Contains replaceable nylon trimming line that advances when the trimmer head is tapped against the ground while the head is turning at normal operating speed. 3. CUT-OFF KNIFE - Automatically trims line to the correct length: 5 in. after head is tapped on the ground. If trimmer is operated without a cut-off knife the line will become too long, the engine will overheat, and engine damage may occur. 4.
99944200540 ASSEMBLY ASSEMBLY Power Head Shaft/Lower Shaft Assembly Do not perform maintenance or assembly procedures with engine running. Parts Required: PAS or SRM-SB Power Head w/Shaft & Coupling 1. Set Power Head/Shaft Assembly on a level surface. 2. Pull locator pin (A) out, and turn counter-clockwise 1/4 turn to lock-out position. 3. Remove vinyl cap from attachment drive shaft. 4. Remove cardboard spacer, if necessary. 5.
OPERATION 99944200540 OPERATION Note: Refer to your PAS power source Operator's Manuals for correct engine fueling, starting and stopping instructions. Moving parts can amputate fingers or cause severe injuries. Keep hands, clothing and loose objects away from all openings. Always stop engine, disconnect spark plug, and make sure all moving parts have come to a complete stop before removing obstructions, clearing debris, or servicing unit. Allow unit to cool before performing service.
99944200540 MAINTENANCE Click HERE or go to http://www.echo-usa.com/products/maintenance-kit for information on Maintenance Kits Maintenance Intervals Component/System Maintenance Procedure Skill Level Drive Shaft Grease 1 Every 25 hours of use (1) Gear Housing Grease 1 Every 50 hours of use (1) Screws/Nuts/Bolts Inspect/ Tighten/ Replace 1 Before Each Use Interval IMPORTANT - Time intervals shown are maximum.
MAINTENANCE 99944200540 Nylon Line Replacement Wear Gloves or personal injury may result: ◆ Cutoff knife is sharp. ◆ Gearcase and surrounding area may be hot. 1. Cut one piece of line to recommended length. 2.0 mm (.080) diam. – 6 m (20 ft.) 2.4 mm (.095) diam. – 6 m (20 ft.) 2. Align arrows on top of knob with openings in eyelets. 3. Insert one end of trimmer line into an eyelet, and push line equal distance through trimmer head. 4.
99944200540 STORAGE When the wear indicators located at the bottom of the SpeedFeed® head are worn smooth, or if holes appear, replacement of the cover or the entire SpeedFeed® head is required. Wear Indicators STORAGE Storage Hook Installation 1. Insert small end of hook into locating hole on attachment shaft. 2. Slide plastic cap onto end of attachment shaft. SPECIFICATIONS MODEL 99944200540 Shaft Length 834 mm (32.87 in.) Attachment Width 177 mm (6.97 in.) Attachment Height 236 mm (9.29 in.
PRODUCT REGISTRATION 99944200540 PRODUCT REGISTRATION Thank you for choosing ECHO Power Equipment Please go to http://www.echo-usa.com/Warranty/Register-Your-ECHO to register your new product on-line. It's FAST and EASY! NOTE: your information will never be sold or misused by ECHO, Inc. Registering your purchase enables us to contact you in the unlikely event of a service update or product recall, and verifies your ownership for warranty consideration.
99944200540 X7532279109 © 7/2016 ECHO Inc.
S06400369501/S06400999999 ECHO, INCORPORATED 400 Oakwood Road Lake Zurich, IL 60047 www.echo-usa.
