ProSweep Attachment Model 99944200553 Operator's Manual FOR MODELS: SRM-2400SB SRM-260SB/261SB PAS-2400 PAS-230/231 PAS-260/261 PAS-2601 PAS-265 ENGLISH ESPAñOL FRANCAIS warning Read rules for safe operation and instructions carefully. ECHO provides an Operator's Manual with this attachment and a separate Operator's Manual and Safety Manual (if available) with the Power Head. All manuals must be read and understood for proper and safe operation.
Introduction Welcome to the ECHO family. This ECHO product was designed and manufactured to provide long life and on-the-jobdependability. Read and understand this manual included with your attachment. You will find this manual easy to use and full of helpful operations tips and SAFETY messages. the operator's manual Read and understand this manual before operation. Keep it in a safe place for future reference.
ProSweep Attachment Operator's Manual Safety manual safety symbols and important information Throughout this manual and on the product itself, you will find safety alerts and helpful, informational messages preceded by symbols or key words. The following is an explanation of those symbols and key words and what they mean to you.
Physical Condition Your judgment and physical dexterity may not be good: • if you are sick, • if you are taking medication, • if you have taken alcohol or drugs. Operate unit only if you are physically and mentally well. Eye Protection Wear eye protection that meets ANSI Z87.1 or CE requirements whenever you operate the ProSweep attachment. Hand Protection Wear no-slip, heavy duty work gloves to improve your grip on the Pro Attachment Series or Split Boom handles.
ProSweep Attachment Operator's Manual Repetitive Stress Injuries -- It is believed that overusing the muscles and tendons of the fingers, hands, arms, and shoulders may cause soreness, swelling, numbness, weakness, and extreme pain in those areas. Certain repetitive hand activities may put you at a high risk for developing a Repetitive Stress Injury (RSI).
equipment warning Use this attachment with ECHO approved models only. Serious injury may result from the use of this attachment combined with a non approved ECHO product. Before operation a complete check of the unit must be performed; • ECHO, INC. will not be responsible for the failure of sweeping devices, accessories and parts which have not been tested and approved by ECHO for use with this ProSweep Attachment. • Check unit for loose/missing nuts, bolts and screws. Tighten and/or replace as needed.
ProSweep Attachment Operator's Manual Description Locate this safety decal on your attachment. Make sure the decal is legible and that you understand and follow the instructions on it. If it cannot be read, a new one can be ordered from your ECHO dealer. See PARTS ORDERING instructions for specific information. 3 2 1 4 P/N 89016025560 1. BRUSHES - Permanently attached to drum holders and come standard with 0.5 mm (0.018 in.) diameter nylon bristles. Optional .7 mm (0.028 in.
Contents After opening the carton, check for damage. Immediately notify your retailer or ECHO Dealer of damaged or missing parts. Use the contents list to check for missing parts. ___ ___ ___ ___ ___ 1 1 1 1 1 - Brushes / Gear Housing Assembly Lower Drive Shaft Assembly Operators Manual Warranty Registration Card Storage Hook Assembly Assembly WARNING Do not perform maintenance or assembly procdures with engine running.
ProSweep Attachment Operator's Manual power head shaft/lower shaft assembly 1. Turn gear housing assembly over so that gear housing mounting bolt (E) faces upward. 2. Pull locator pin (A) out, and turn counter-clockwise 1/4 turn to lock-out position. B D A Caution Thrown objects hazard. Install lower drive shaft so that gear housing mounting bolt (E) faces upwards. Otherwise debris will be thrown toward user. 3. Remove cardboard spacer from coupler, if necessary. 4.
Operation WARNING Moving parts can amputate fingers or cause severe injuries. Keep hands, clothing and loose objects away from all openings. Always stop engine, disconnect spark plug, and make sure all moving parts have come to a complete stop before removing obstructions, clearing debris, or servicing unit. NOTE Refer to your Pro Attachment Series or Split Boom Operator's Manuals for correct engine fueling, starting and stopping instructions. 1.
ProSweep Attachment Operator's Manual 11 Maintenance WARNING Moving parts can amputate fingers or cause severe injuries. Keep hands, clothing and loose objects away from all openings. Always stop engine, disconnect spark plug, and make sure all moving parts have come to a complete stop before removing obstructions, clearing debris, or servicing unit. Allow unit to cool before performing service. Wear gloves to protect hands from sharp edges and hot surfaces.
Drive Shaft IMPORTANT Lower and upper drive shaft must be lubricated with POWER BLENDXTM grease every 25 hours of operation, otherwise drive shaft assembly overheating and failure can result. 1. Remove gear housing locator screw (A). 2. Loosen gear housing mounting bolt (B). 3. Pull gear box from drive shaft housing. 4. Pull flexible cable from the drive shaft housing, wipe clean and re-coat with a thin coating [15 ml (1/2 oz.)] of POWER BLENDXTM. 5.
ProSweep Attachment Operator's Manual brush replacement Level 1. Tools Required: 8 mm Open End Wrench, Cross Head Screwdriver Parts Required: Standard Brush Assy .018 in. P/N 99944200551 QTY (2) Optional Brush Assy .028 in. P/N 25020225661 QTY (2) Brushes that are broken off, deformed, or worn to within 25.4 mm (1 in.) of the brush holder drum should be replaced for best sweeping efficiency. 1. Locate brush holder access hole (A) near outer drum end. A 2.
Storage 1. Clean ProSweep attachment bristles with water. IMPORTANT Do not immerse this attachment in water. Water will enter gear housing and damage gears, bearings and seals. 2. Apply thin coating of oil to metal parts to prevent rust. 3. Lubricate lower shaft assembly with grease. (Refer to Lubrication instructions.) 4. Store ProSweep attachment in a dry place out of reach of children. Do not store attachment with the weight resting on brushes which could bend over a long period of time.
ProSweep Attachment Operator's Manual note 15
Servicing Information parts/serial number Genuine ECHO Parts and ECHO REPOWER™ Parts and Assemblies for your ECHO products are available only from an Authorized ECHO Dealer. When you do need to buy parts always have the Model Number and Serial Number of the attachment with you. You can find these numbers on the driveshaft model/serial number label. For future reference, write them in the space provided below. Model No. _____________ SN.
