Use and Care Manual

99944200596 SAFETY

X7712093000 11

ENGLISH

Avoid Hot Surfaces

• Keep exhaust area clear of flammable debris. Avoid

contact during and immediately after operation.

Equipment

Use this attachment with ECHO approved models only. Serious

injury may result from the use of this attachment combined with

a non approved ECHO product.

• Check unit for loose/missing nuts, bolts, and screws. Tighten and/

or replace as needed.

• Never adjust blades when the engine is operating.

• Inspect hand guard for damage. Replace if damaged or missing.

• Check that the blade assembly is firmly attached and in safe

operating condition. Dull, loose or damaged blades should not be

used.

Note: ECHO, INC. will not be responsible for the failure of cutting

devices, attachments or accessories which have not been

tested and approved by ECHO.

Moving parts can amputate fingers or cause severe injuries.

Keep hands, clothing and loose objects away from all openings.

◆ ALWAYS stop engine, disconnect spark plug, and make sure

all moving parts have come to a complete stop before

removing obstructions, clearing debris, or servicing unit.

◆ DO NOT start or operate unit unless all guards and protective

covers are properly assembled to unit.

◆ NEVER reach into any opening while the engine is running.

Moving parts may not be visible through openings.