Use and Care Manual

ASSEMBLY 99944200596

14 X7712093000

5. Carefully fit attachment drive

shaft assembly into coupler (B)

to decal assembly line (C),

making sure that the inner

lower drive shaft engages the

square upper drive shaft

socket.

Note: Earlier model power

heads may have shorter

couplings.

Note: Lower bearing housing

and head assembly must be in line with the engine.

6. Rotate locater pin (A) ¼ turn

clockwise to engage lower shaft

hole. Insure locater pin is fully

engaged by twisting lower drive

shaft. Locater pin should snap

flush in coupler. Full engage-

ment will prevent further shaft

rotation.

7. Secure lower shaft assembly to

coupler by tightening clamping

knob (D).

Support Handle Removal

Note: Support handles or support handles with barrier bars are not

recommended for use with this attachment.

1. Remove support handle

assembly, barrier bar (if

installed), and mounting hard-

ware from PAS or SRM-SB

power head.

2. Retain parts for future use.