Use and Care Manual

99944200596 MAINTENANCE

X7712093000 19

ENGLISH

Lubrication

Blades

Level 1.

Hedge Clipper blades are very sharp. Touching them may lead

to severe personal injury. Avoid touching blades whenever pos-

sible, and always wear gloves to protect hands.

1. Brush loose debris from blade

and coat both sides of blade

with the 50-50 cleaning mixture.

2. Allow cleaning mixture to soften

the remaining gummy residue

then wipe it from the blade.

3. Apply clean oil to the entire

length of the blade. Be certain

the blade bolts are lubricated.

4. Wipe excess oil from the blade

before putting the unit back in service.

Gear Case

Level 1.

1. Clean dirt from grease fittings

(A).

2. Carefully pump grease into fit-

tings (A). DO NOT force

grease. Too much pressure will

force grease past seals and

cause damage. Apply 1-2

pumps of grease every 15-25

hours of operation.

3. Wipe excess grease from around grease fitting.

Drive Shaft Assembly

Level 1.

Parts Required: 20W Engine Oil (blade lubrication), 50-50 mixture of

kerosene and 20W oil (blade cleaning)

Parts Required: Lithium Base Grease.