Use and Care Manual

MAINTENANCE 99944200596

20 X7712093000

Hedge Clipper blades are very sharp. Touching them may lead

to severe personal injury. Avoid touching blades whenever pos-

sible, and always wear gloves to protect hands.

1. Carefully remove locating

screw (A) and loosen clamping

screw (B). Remove the flex

drive shaft assembly from the

gear housing.

2. Pull the drive shaft (C) from the

drive shaft assembly, and wipe

clean. Apply 15 ml (0.5 oz.) of

grease.

3. Slide the flex shaft back into the

drive shaft assembly, being

careful not to get dirt on the flex

shaft.

4. Align the locating screw hole in

gear case with the locating hole

in drive shaft assembly, install

and tighten locating screw (A), and tighten clamping screw (B).

Blades

Hedge trimmer blades are very sharp, touching them may lead

to severe personal injury. Use long hex wrenches and sockets

with extensions when tightening blade screws and blade lock

nuts to keep hands at a safe distance from sharp blades.

Blades should only be removed and reinstalled by an authorized

ECHO servicing dealer, otherwise premature wear or internal

damage may occur.

Parts Required: Lithium Base Grease.