Use and Care Manual

99944200601 ASSEMBLY
X7712092600 15
© 04/2017 ECHO Inc.
ENGLISH
4-screw front handle
1. Remove screws and nuts and
back plate from handle.
2. Position front handle on shaft
and install Barrier Bar using
5x35 mm screws and new nuts
included with kit. Handle must
be at least 250 mm (10 in.) from
center of rear handle grip.
3. Adjust handle position for
comfortable operation, and
tighten screws securely.
2-screw front handle
1. Remove screws and nuts and
back plate from handle.
2. Position front handle on shaft
and install Barrier Bar using
5x35 mm screws provided in
kit. Handle must be at least
250 mm (10 in.) from center of
rear handle grip.
3. Adjust handle position for
comfortable operation, and
tighten screws securely.
Note: The Barrier Bar is not a
handle.
Shield and Blade Installation
Install the shield first, then install the blade. Note the orientation of the
components, install as shown.