Use and Care Manual

99944200601 MAINTENANCE
X7712092600 19
© 04/2017 ECHO Inc.
ENGLISH
Lubrication
Level 1.
Gear Housing
1. Clean all loose debris from gear case.
2. Remove plug (A) and check
level of grease. Grease should
fill gear case to bottom of
grease plug hole.
3. Add grease if necessary using
manual grease gun or squeeze-
type tube. Do not use high
pressure grease gun. DO NOT
over-fill.
4. Install plug (A).
Drive Shaft (Lower)
1. Loosen screw (B) and remove
locating screw (C). Pull gear
case and shield from drive shaft
housing.
2. Pull flexible cable from the drive
shaft housing, wipe clean and
re-coat with 15 ml (0.5 oz.) of
grease.
3. Slide the flexible cable back in
the drive housing. DO NOT get dirt on the flex cable.
4. Install the gear housing and shield assembly.
Parts Required: Lithium Base Grease
A
B
C