Mid-Reach Hedge Trimmer Attachment FOR MODELS: SRM-2100SB, 2400SB, 210SB, 211SB, 225SB, 260SB, 261SB, PAS-2100, 2400, 2601, 210, 211, 225, 225VP, 225VPB, 230, 231, 260, 261, 265, 266, 280, 2620 Operator’s Manual Users of this equipment risk injury to themselves and others if the unit is used improperly and/or safety precautions are not followed. ECHO provides an operator’s manual and a safety manual. Both must be read and understood for proper and safe operation.
TABLE OF CONTENTS 99944200640 TABLE OF CONTENTS Introduction ................................................................................................. 3 Servicing Information .................................................................................. 3 Parts/Serial Number ............................................................................ 3 Service................................................................................................. 3 Echo Consumer Product Support ......
99944200640 INTRODUCTION INTRODUCTION The operators manual contains specifications and information for safety, operation, maintenance, storage and assembly specific to this product. Scan the QR codes throughout the operator’s manual for more information. The safety manual explains possible hazards and the measures you should take to insure safe operation. SERVICING INFORMATION Parts/Serial Number Genuine ECHO Parts and Assemblies for your ECHO products are available only from an Authorized ECHO Dealer.
SAFETY 99944200640 Echo Consumer Product Support If you require assistance or have questions concerning the application, operation, or maintenance of this product, call the ECHO Consumer Product Support Department at 1-800-673-1558 from 8:00 am to 5:00 pm (Central Standard Time) Monday through Friday. Before calling, please know the model and serial number of your unit. Product Registration Register your ECHO equipment on-line at www.echo-usa.
99944200640 SAFETY The safety alert symbol accompanied by the word “CAUTION” calls attention to an act or condition which may lead to minor or moderate personal injury if not avoided. The enclosed message provides information necessary for the protection of the unit. Note: This enclosed message provides tips for use, care and maintenance of the unit. CIRCLE AND SLASH SYMBOL This symbol means the specific action shown is prohibited. Ignoring these prohibitions can result in serious or fatal injury.
SAFETY Symbol 99944200640 Description Hot Surface Symbol Description Fuel and Oil Mixture AVOID KICKOUT Keep Bystanders At Least 15 m (50 ft.) Away Beware Thrown Objects Wear Eye Protection Keep Bystanders and Helpers Away 15 m (50 ft.
99944200640 SAFETY Symbol Description Symbol DO NOT USE BLADES - Line Head Only ENGLISH Do not operate closer than 15 m (50 ft.) from electrical hazards. Keep bystanders at least 15 m (50 ft.) away. Description Plan retreat path from falling objects. Personal Condition and Safety Equipment Users of this product risk injury to themselves and others if the unit is used improperly and/or safety precautions are not followed. Proper clothing and safety gear must be worn when operating unit.
SAFETY 99944200640 • If you have taken alcohol or drugs. Operate unit only if you are physically and mentally well. Eye Protection ◆ ◆ Eye protection that meets ANSI Z87.1 or CE requirements must be worn whenever you operate the unit. For additional safety, a full-face shield may be worn over safety glasses or goggles to provide protection from sharp branches or flying debris. Hand Protection Wear sturdy, no-slip, rubber work gloves to improve your grip on the handles.
9944200640 SAFETY Keep long hair away from engine and air intake. Retain hair with cap or net. Heavy protective clothing can increase operator fatigue, which may lead to heat stroke. Schedule heavy work for early morning or late afternoon hours when temperatures are cooler. Extended Operation / Extreme Conditions Prolonged exposure to cold and/or vibration may result in injury. Read and follow all safety and operation instructions to minimize risk of injury.
SAFETY 99944200640 • If you experience discomfort, redness, and swelling of the fingers followed by whitening and loss of feeling, consult your physician before further exposing yourself to cold and vibration. Repetitive Stress Injuries (RSI) It is believed that overusing the muscles and tendons of the fingers, hands, arms, and shoulders may cause soreness, swelling, numbness, weakness, and extreme pain in those areas.
99944200640 SAFETY Read the Manuals • Provide all users of this equipment with the Operator’s Manual and Safety Manual for instructions on Safe Operation. Clear the Work Area • Spectators and fellow workers must be warned, and children and animals prevented from coming nearer than 15 m (50 ft.) while the unit is in use. Keep a Firm Grip • Hold the front and rear handles with thumbs and fingers encircling the grips. Keep a Solid Stance • Maintain footing and balance at all times.
SAFETY 99944200640 Equipment Use this attachment with ECHO approved models only. Serious injury may result from the use of this attachment combined with a non approved ECHO product. • Check unit for loose/missing nuts, bolts, and screws. Tighten and/or replace as needed. • Never adjust blades when the engine is operating. • Check that the blade assembly is firmly attached and in safe operating condition. Dull, loose or damaged blades should not be used. ECHO, INC.
99944200640 DESCRIPTION DESCRIPTION Locate the safety decal(s) on your unit. Make sure the decal(s) is legible and that you understand and follow the instructions on it. If a decal cannot be read, a new one can be ordered from your ECHO dealer. ENGLISH 1 2 5 3 DANGER STAND CLEAR MINIMUM 50 FT. 1. 4 BLADES - Double reciprocating blades mounted to a blade support bar. Double sided blades, are capable of cutting on either side. 2.
CONTENTS 99944200640 CONTENTS The ECHO product you purchased has been factory pre-assembled for your convenience. Due to packaging restrictions, some assembly may be necessary. After opening the carton, check for damage. Immediately notify your retailer or ECHO Dealer of damaged or missing parts. Use the contents list to check for missing parts.
99944200640 5. Note: Earlier model power heads may have shorter couplings. B C ENGLISH Carefully fit attachment drive shaft assembly into coupler (B) to decal assembly line (C), making sure that the inner lower drive shaft engages the square upper drive shaft socket. OPERATION A Note: Lower bearing housing and head assembly must be in line with the engine. 6. 7. Rotate locater pin (A) ¼ turn clockwise to engage lower shaft hole. Insure locater pin is fully engaged by twisting lower drive shaft.
OPERATION 99944200640 Hedge Trimming Shoulder Harness (if included) 1. 2. Loosen the harness clamp screw. Put the harness on and attach it to the unit. 3. Adjust the harness for comfortable operation. 4. Tighten the harness clamp screw. Engine exhaust IS HOT, and contains Carbon Monoxide (CO), a poison gas. Breathing CO can cause unconsciousness, serious injury, or death. Exhaust can cause serious burns. ALWAYS position unit so that exhaust is directed away from your face and body.
99944200640 MAINTENANCE MAINTENANCE Your ECHO unit is designed to provide many hours of trouble free service. Regular scheduled maintenance will help your unit achieve that goal. If you are unsure or are not equipped with the necessary tools, we recommend that you take your unit to an ECHO Servicing Dealer for maintenance. To help you decide whether you want to DO-IT-YOURSELF or have the ECHO Dealer do it, each maintenance task has been graded. If the task is not listed, see your ECHO Dealer for repairs.
MAINTENANCE 99944200640 Lubrication Blades Level 1. Parts Required: 20W Engine Oil (blade lubrication), 50-50 mixture of kerosene and 20W oil (blade cleaning) Hedge Trimmer blades are very sharp. Touching them may lead to severe personal injury. Avoid touching blades whenever possible, and always wear gloves to protect hands. 1. 2. Brush loose debris from blade and coat both sides of blade with the 50-50 cleaning mixture.
99944200640 2. Carefully pump grease into fitting (A). DO NOT force grease. Too much pressure will force grease past seals and cause damage. Apply 1 - 2 pumps of grease every 15 - 25 hours of operation. A Wipe excess grease from around grease fitting. ENGLISH 3. MAINTENANCE A A Drive Shaft Assembly Level 1. Parts Required: Lithium based grease. Hedge Trimmer blades are very sharp. Touching them may lead to severe personal injury.
MAINTENANCE 2. Pull the drive shaft (C) from the housing, wipe clean, then apply 15 ml (0.5 oz.) of grease. 3. Slide the drive shaft back in the drive housing being careful not to get dirt on the flex shaft. 4. Install the gear housing assembly. 99944200640 C Flat edge of washers (D) must be against drive shaft. Blades Hedge trimmer blades are very sharp, touching them may lead to severe personal injury.
99944200640 1. 2. MAINTENANCE Move stop switch to STOP position. Disconnect spark plug wire. Remove blade guard, if installed (see “Blade Guard Remove/Install instructions”). 4. Slide blades to allow file clearance using slots (A) on bottom of blade. Do not pry against cutting edges. 5. File each edge carefully. Follow the original shape of the blade. 6. Install blade guard, if necessary (see “Blade Guard Remove/ Install instructions”). 7. Lubricate blades (see “Lubrication”). 8.
STORAGE 99944200640 STORAGE Always install blade cover when transporting or storing unit. 1. Clean and lubricate cutting blades and gear case. 2. Sharpen cutting blades as required. 3. Apply a light coating of clean 20W engine oil along entire length of blades and on blade bolts. 4. Install blade cover onto hedge clipper cutting blades. 5. Store hedge clipper attachment in a dry, dust free place out of the reach of children, using supplied storage hook. Storage Hook Installation 1.
99944200640 SPECIFICATIONS SPECIFICATIONS X7712092800 © 02/2017 ECHO Inc. 99944200640 962 mm (37.9 in.) 80 mm (3.1 in.) 1.65 kg (3.63 lb.) 4.6:1 Double Reciprocating Blade - Double Edge 557 mm (21.9 in.) 35 mm (1.4 in.) ENGLISH MODEL Length Width Weight Gear Case Cutter Blade Length Pitch Maximum Cut Soft Materials Woody Materials 25.4 mm (1 in.) diameter 13 mm (0.5 in.
PRODUCT REGISTRATION 99944200640 PRODUCT REGISTRATION Thank you for choosing ECHO Power Equipment Please go to http://www.echo-usa.com/Warranty/Register-Your-ECHO to register your new product on-line. It's FAST and EASY! NOTE: your information will never be sold or misused by ECHO, Inc. Registering your purchase enables us to contact you in the unlikely event of a service update or product recall, and verifies your ownership for warranty consideration.
99944200640 PRODUCT REGISTRATION ENGLISH X7712092800 © 02/2017 ECHO Inc.
NOTES 99944200640 NOTES 26 X7712092800 © 02/2017 ECHO Inc.
99944200640 NOTES ENGLISH X7712092800 © 02/2017 ECHO Inc.
T96900001001 - T96900999999 ECHO, INCORPORATED 400 Oakwood Road Lake Zurich, IL 60047 www.echo-usa.
