Use and Care Manual

CONTENTS 99944200640

14 X7712092800

CONTENTS

The ECHO product you purchased has been factory pre-assembled for your

convenience. Due to packaging restrictions, some assembly may be neces-

sary.

After opening the carton, check for damage. Immediately notify your retailer

or ECHO Dealer of damaged or missing parts. Use the contents list to check

for missing parts.

ASSEMBLY

Power Head Shaft To Lower Shaft Assembly

Do not perform maintenance or assembly procedures with en-

gine running.

1. Set Power Head/Shaft Assembly on a level surface.

2. Pull locater pin (A) out, and turn counter-clockwise ¼

turn to lock-out position.

3. Remove vinyl cap from attachment drive shaft.

4. Remove cardboard spacer, if necessary.

Note: Your coupler may appear different than coupler

shown.

1 Mid-Reach Hedge Clipper Attachment

1Blade Cover

1 Shoulder Harness

1 Storage Hook Assembly

1 Safety Manual

1 Operator’s Manual

Parts Required: PAS or SRM-SB Power Head Shaft and Coupling