Use and Care Manual

99944200640 OPERATION

X7712092800 15

ENGLISH

5. Carefully fit attachment drive

shaft assembly into coupler (B)

to decal assembly line (C),

making sure that the inner

lower drive shaft engages the

square upper drive shaft

socket.

Note: Earlier model power heads

may have shorter couplings.

Note: Lower bearing housing and

head assembly must be in line with

the engine.

6. Rotate locater pin (A) ¼ turn

clockwise to engage lower shaft

hole. Insure locater pin is fully

engaged by twisting lower drive

shaft. Locater pin should snap

flush in coupler. Full engage-

ment will prevent further shaft

rotation.

7. Secure lower shaft assembly to

coupler by tightening clamping

knob (D).

OPERATION

Note: Refer to your PAS power source Operator's Manuals for correct

engine fueling, starting and stopping instructions.

Moving parts can amputate fingers or cause severe injuries.

Keep hands, clothing and loose objects away from all openings.

Always stop engine, disconnect spark plug, and make sure all

moving parts have come to a complete stop before removing

obstructions, clearing debris, or servicing unit. Allow unit to

cool before performing service.