Use and Care Manual

MAINTENANCE 99944200640

20 X7712092800

2. Pull the drive shaft (C) from the

housing, wipe clean, then apply

15 ml (0.5 oz.) of grease.

3. Slide the drive shaft back in the

drive housing being careful not

to get dirt on the flex shaft.

4. Install the gear housing assem-

bly.

Flat edge of washers (D) must be against drive shaft.

Blades

Hedge trimmer blades are very sharp, touching them may lead to

severe personal injury. Use long hex wrenches and sockets with

extensions when tightening blade screws and blade lock nuts to keep

hands at a safe distance from sharp blades.

Blades should only be removed and reinstalled by an authorized

ECHO servicing dealer, otherwise premature wear or internal dam-

age may occur.

Sharpening

Level 2.

If a power grinder is used DO NOT allow blade to over heat.