Instructions / Assembly

8 English
ASSEMBLY
Setting Blade Height
See Figure 7.
When shipped, the wheels on the mower are set to a
low- cutting position. Before using the mower for the first
time, raise the cutting position to the height best suited for
your lawn. The average lawn should be between 1-1/2 in.
to 2 in. during cool months and between 2 in. and 3-1/4 in.
during hot months.
To adjust the blade height:
 Remove start key and battery pack.
 Adjust each wheel to achieve the desired blade height.
NOTE: Moving the height adjustment levers toward the
inside of the cutting deck lowers the blade height, and
moving the levers toward the outside raises the blade
height.
 Reinstall start key and battery pack when you are ready
to mow.
Installing the Grass Bag
(For Rear Bagging Operation)
See Figures 5 - 6.
NOTE: When using the grass bag, do not install the mulching
plug.
 Remove start key and battery pack.
 Lift the rear discharge door.
 Lift the grass bag by its handle and place under the rear
discharge door so that the hooks on the grass bag are
seated onto the slots on the mower housing.
 Release the rear discharge door.
 Reinstall start key and battery pack when you are ready
to mow.