Full Product Manual

Table Of Contents

OPERATION CS-4510

32 X7503352800

7. Push choke control knob (A) all

the way IN (OPEN [ ]choke

position).

8. Pull starter handle to start the

engine.

9. When engine starts,

immediately squeeze and

release throttle trigger (C) to

release fast idle throttle latch

otherwise severe brake

damage may occur.

Note: Do not pull starter rope

out to the maximum possible position.

Do not allow recoil handle to snap back against the case.

If engine does not start after 5 pulls, repeat instructions.

Do not increase engine speed while chain brake is locked.

Severe brake damage will result.

Starting a Hard to Start Engine

Make sure the bar and chain are free from any obstruction

when starting the chainsaw.

◆ Do not start engine before chain brake is locked.

1. Move chain brake lever fully

FORWARD to LOCK chain

brake before starting.

2. Press throttle trigger lockout (D)

down while grasping throttle

trigger (C).

3. Securely hold the chainsaw as

shown and pull starter handle.

4. When engine starts,

immediately release throttle

trigger, otherwise, severe brake

damage may occur.

Chain brake