Full Product Manual
Table Of Contents
- Operator’s Manual CS-4510 Chainsaw
- Table of Contents
- Introduction
- Servicing Information
- Safety
- Emission Control
- (Exhaust & Evaporative)
- Description
- Contents
- Assembly
- Operation
- Maintenance
- Troubleshooting
- Storage
- Specifications
- Product Registration
CS-4510 MAINTENANCE
X7503352800 49
© 02/24 ECHO Incorporated
6. Push the Oil Filter (A) into the tank, service with oil and install the Oil
Cap (B).
Guide Bar
1. Clean before using.
2. Clean the groove of the guide
bar (A) with a small
screwdriver.
3. Clean oil holes (B) with a wire.
4. Invert guide bar periodically.
5. Clean the guide bar mount area
before installing the guide bar.
Sprocket
• A damaged sprocket will cause
premature damage or wear of
saw chain.
• When the sprocket has worn
0.5 mm (0.020 in.) or more,
replace it.
• Check sprocket when you install
new chain. Replace it if worn.
Some tree sap and resins are corrosive. Thoroughly wash the guide
bar and sprocket areas after each use, then coat metal parts with light
oil.
A
B
B
0.5 mm (0.020 in.)