Use and Care Manual

37
DCS-5000
99922238004
© 01/2023 ECHO Incorporated
MAINTENANCE
• Properly led cutters are shown in
illustration.
• When setting of the chain is
nished, soak it in oil and wash
away lings completely before
using.
• When chain has been led on the
bar, supply sufcient oil to it, move
the chain slowly to wash away the
lings before using again.
• If the chainsaw is operated with
lings clogged in the groove, the
saw chain and the guide bar will be
damaged prematurely.
• If the saw chain becomes soiled
with resin, for instance, clean it with
kerosene and soak in it oil.
Top plate
ling angle
Side plate angle
0.64 mm (0.025 in.)
Parallel
Depth gauge
30°
60°
To sharpen other chains, follow chain manufacturer’s instructions.