Use and Care Manual

GT-225 OPERATION

X7732273902 23

Note: If attachment moves, readjust carburetor according to

“Carburetor Adjustment” instructions in this manual or see

your ECHO Dealer.

1. Stop Switch

Move stop switch (A) away from

the STOP position.

2. Purge Bulb

Pump purge bulb (C) until fuel is

visible and flows freely in the

clear fuel tank return line. Pump

bulb an additional 4 or 5 times.

3. Recoil Starter

Lay the unit on a flat area and

keep movable attachment parts

clear of all obstacles. Firmly grip

throttle handle with left hand.

Rapidly pull recoil starter

handle/rope (D) until engine

fires.

Note: If engine does not start

after 5 pulls, use Cold

Start Procedure.

Stopping Engine

If engine does not stop when stop switch is moved to STOP

position, close choke - COLD START position - to stall engine.

Have your ECHO dealer repair stop switch before using unit

again.