Use and Care Manual

MAINTENANCE HCS-3020 4020

24 X7702243800

IMPORTANT NOTE - Time intervals shown are maximum. Actual use and your

experience will determine the frequency of required maintenance.

MAINTENANCE PROCEDURE NOTES:

(1) Apply lithium based grease every 25 hours of use.

(2) Inspect blade, and clean and sharpen as needed. Lubricate blades

periodically during use

(3) Low evaporative fuel tanks DO NOT require regular maintenance to maintain

emission integrity

* Replacement is recommended based on the finding of damage or wear during

inspection.

Air Filter

Level 1.

Choke Shutter Inspect/Clean * 1

Fuel System Inspect (3) 1

Cooling System Inspect/Clean 2

Recoil Starter Rope Inspect/Clean* 1

Screws/Nuts/Bolts Inspect/Tighten/Replace* 1

Blades Inspect/Clean (2)

Every Refuel

Fuel System Inspect (3) 1

3 Months

Air Filter Replace* 1

Fuel Filter Inspect* 1

Fuel Cap Gasket Inspect* 1

Spark Plug Inspect/Clean/Replace* 1

Muffler Spark Arrestor Inspect/Clean/Replace* 2

Cylinder Exhaust Port Inspect/Clean/Decarbon 2

Gear Housing Grease(1) 2

Yearly

Fuel Filter Inspect/Replace* 1

Fuel Cap Gasket Replace* 1

COMPONENT/SYSTEM

MAINTENANCE

PROCEDURE

REQ’D

SKILL

LEVEL