Use and Care Manual

Pro AttAchment SerieS

oPerAtor'S mAnuAl

contents

The ECHO product you purchased has been factory pre-assembled for your convenience. Due to packaging restrictions,

other assembly may be necessary.

After opening the carton, check for damage. Immediately notify your retailer or ECHO Dealer of damaged or missing

parts. Use the contents list to check for missing parts.

1 - Power Head w / Upper Drive Shaft Assembly

1 - Plastic Bag (co-pack)

- 1, Operator's Manual

- 1, Safety Manual

- 1, Warranty Registration Card

- 1, Safety Glasses

- 1, Echo Power BlendX

2-stroke oil sample

assembly

attachment

shaft assembly

Parts Required: PAS Attachment Assembly

1. Set Power Head/Shaft Assembly on a level surface.

2. Pull locator pin (A) out, and turn counter-clockwise 1/4 turn to

lock-out position.

3. Remove vinyl cap from attachment drive shaft.

4. Remove cardboard spacer, if necessary.

5. Carefully t attachment drive shaft assembly into coupler (B) mak-

ing sure that the inner lower drive shaft engages into the square

upper drive shaft socket.

6. Rotate locator pin (A) 1/4 turn clockwise to engage lower shaft

hole. Insure locator pin is fully engaged by twisting lower drive

shaft. Locator pin should snap ush in coupler. Full engagement

will prevent further shaft rotation.

7. Secure lower shaft assembly to coupler by tightening clamping

knob (C).