Use and Care Manual

OPERATION PAS-2620

20 X7502342500

Starting Cold Engine

The attachment will operate immediately when the engine

starts, and could result in possible serious injury. Keep mov-

able parts of the attachment away from objects that could be-

come entangled or thrown, and surfaces that could cause loss

of control.

1. Stop Switch

Move stop switch button (A) for-

ward, away from the STOP posi-

tion.

2. Choke

Move choke lever (B) to COLD

START ( ) position.

3. Purge Bulb

Pump purge bulb (C) until fuel is

visible and flows freely in the

clear fuel tank return line. Pump

bulb an additional 4 or 5 times.

4. Recoil Starter

Lay the unit on a flat area and

keep movable attachment parts

clear of all obstacles. Firmly

grasp throttle handle and throttle trigger lockout with left hand and fully

depress throttle trigger to wide open position. Rapidly pull recoil starter

handle/rope (D) until engine fires (or maximum five [5] pulls).