Use and Care Manual

OPERATION PAS-2620

22 X7502342500

2. Purge Bulb

Pump purge bulb (B) until fuel is

visible in the “Clear” fuel return

line. Pump bulb an additional 4

or 5 times.

3. Recoil Starter

Lay the unit on a flat area and

keep movable attachment parts

clear of all obstacles. Firmly grip

throttle handle and throttle trig-

ger lockout with left hand. Rap-

idly pull recoil starter handle/

rope (D) until engine fires.

Note: If engine does not start

after 5 pulls, use Cold Start Procedure.

Stopping Engine

1. Throttle

Release throttle trigger and

allow engine to return to idle

before shutting off engine.

2. Stop Switch

Move stop switch button (A)

backward to STOP position.

If engine does not stop when stop switch is moved to STOP po-

sition, close choke - COLD START position - to stall engine.

Have your ECHO dealer repair stop switch before using unit

again.