Use and Care Manual

PAS-2620 SPECIFICATIONS
X7502342500 35
© 5/2017 ECHO Inc.
ENGLISH
7. Allow engine to cool then remove the spark plug and pour 7 cc
(0.25 oz.) of fresh, clean, two-stroke engine oil into the cylinder through
the spark plug hole.
8. Pull the recoil starter handle 2-3 times to distribute the oil inside the
engine.
9. Observe the piston location through the spark plug hole. Pull the recoil
handle slowly until the piston reaches the top of its travel and leave it
there.
10. Install the spark plug.
SPECIFICATIONS
MODEL PAS-2620
Length 1035 mm (40.7 in.)
Width 273 mm (10.7 in.)
Height 258 mm (10.2 in.)
Weight (dry) 4.5 kg (9.9 lb.)
Engine Type
Air cooled, two-stroke, single cylinder gasoline
engine
Bore 34.0 mm (1.34 in.)
Stroke 28.0 mm (1.1 in.)
Displacement 25.4 cc (1.55 cu. in.)
Exhaust
Spark arrestor muffler or spark arrestor muffler
with catalyst
Carburetor Diaphragm with purge pump
Ignition System
Flywheel magneto, capacitor discharge ignition
type
Spark Plug NGK CMR7H - Gap 0.65 mm (0.026 in.)
Fuel Mixed (Gasoline and Two-stroke Oil)
Fuel/Oil Ratio
50:1 Power Blend X
TM
or ECHO Red Armor
®
ISO-L-EGD (ISO/CD 13738) and J.A.S.O.
M345- FD
, two-stroke, air-cooled engine oil.
Gasoline
Use 89 Octane unleaded. Do not use fuel
containing methyl alcohol, more than 10% ethyl
alcohol or 15% MTBE. Do not use alternative
fuels such as
E-20 or E-85.
Oil
Power Blend X
™
or ECHO Red Armor®
Premium Universal 2-Stroke Oil
Fuel Tank Capacity 0.61 l (20.6 US fl. oz.)
Starter System Automatic Rewind Starter
Clutch Centrifugal Type