Operator's Manual
Table Of Contents
- PB-580 H/T Power Blower
- Table of contents
- Introduction
- Servicing information
- Safety
- Emission Control (Exhaust & Evaporative)
- Description
- Contents
- Assembly
- Operation
- Maintenance
- Troubleshooting
- Storage
- Specifications
- Warranty Statements
- Product Registration
- Notes
PB-580 H/T MAINTENANCE
X7505200601 31
© 04/2015 ECHO Inc.
Throttle Cable Adjustment
Level 1
If engine idle speed changes when blower pipe is moved, or engine will not reach full wide open throttle
speed, adjust throttle cable.
1. Loosen handle adjustment knob (C) and tilt Tube Throttle
handle forward to expose Adjustment Screw (D).
2. Turn Adjustment Screw until Throttle Trigger free play is
4-6mm (3/16-1/4 in.).
3. After adjustment, squeeze and release Throttle Trigger
several times to verify Carburetor Throttle Shaft has full
range of movement from idle to wide open throttle positions.
C
D
4-6 mm