Use and Care Manual

MAINTENANCE PE-225

34 X7732272802

Lubrication

Level 1.

Parts Required: Lithium Grease.

Gear cases without grease plug (A) do not require lubrication.

Note: Your debris shield may appear different than the debris shield

shown.

Gear Housing

1. Remove plug (A) and add grease

to gear housing. Do not overfill.

2. Replace plug and tighten

securely.

Drive Shaft

1. Loosen screws (B) and remove

center locating screw (C). Pull

gear box and shield from drive

shaft housing.

2. Pull flexible cable from the drive

shaft housing, wipe clean and re-

coat with 15 ml (0.5 oz.) of

grease.

3. Slide the flexible cable back in

the drive housing. DO NOT get

dirt on the flex cable.

4. Install the gear housing and shield assembly. Align locating screw hole

with hole in drive shaft housing.

5. Tighten screws securely.