Use and Care Manual

OPERATION PE-2620

20 X7502341200

◆ Fuel tanks/cans may be under pressure. Always loosen fuel

caps slowly allowing pressure to equalize.

◆ NEVER refuel a unit when the engine is HOT or RUNNING!

◆ DO NOT fill fuel tanks indoors. ALWAYS fill fuel tanks

outdoors over bare ground.

◆ DO NOT overfill fuel tank. Wipe up spills immediately.

◆ Securely tighten fuel tank cap and close fuel container after

refueling.

◆ Inspect for fuel leakage. If fuel leakage is found, do not start or

operate unit until leakage is repaired.

◆ Move at least 3 m (10 ft.) from refueling location before

starting the engine.

Mixing Instructions

1. Fill an approved fuel container

with half of the required amount of

gasoline.

2. Add the proper amount of 2-stroke

oil to gasoline.

3. Close container and shake to mix

oil with gasoline.

4. Add remaining gasoline, close fuel

container, and remix.

Spilled fuel is a leading cause of hydrocarbon

emissions. Some states may require the use of

automatic fuel shut-off containers to reduce fuel

spillage. For more information scan the QR code.

After use

• DO NOT store a unit with fuel in its tank. Leaks can occur.

Return unused fuel to an approved fuel storage container.

Storage - Fuel storage laws vary by locality. Contact your local government for

the laws affecting your area. As a precaution, store fuel in an approved, airtight

container. Store in a well-ventilated, unoccupied building, away from sparks and

flames.

Stored fuel ages. Do not mix more fuel than you expect to use in thirty

(30) days, ninety (90) days when a fuel stabilizer is added.

Fuel to Oil Mix – 50:1 Ratio

US Metric

Gas Oil Gas Oil

Gallons Oz. Liter CC.

12.65100

25.210200

51325500