Use and Care Manual

OPERATION PE-2620
24 X7502341200
© 1/2016 ECHO Inc.
Edger Operation Techniques
Engine exhaust IS HOT, and contains Carbon Monoxide (CO), a
poison gas. Breathing CO can cause unconsciousness, serious
injury, or death. Exhaust can cause serious burns. ALWAYS
position unit so that exhaust is directed away from your face and
body.
1. Before edging, water the area
to soften the ground to make
edging easier.
2. Before edging, check the area
and remove all obstacles and
objects that could be thrown.
3. Plan to edge regularly to
make it easier to keep a neat
edge and to avoid having to
make more than one pass.
Note: Blade depth may have
to be adjusted due to
differences in height
between the hard
surface and the top of the grass.
Never adjust blade height with engine running, otherwise serious
personal injury may result.
4. Loosen adjustment knob and
adjust the blade's depth of cut
to produce a fine cut between
sidewalk and grass using a
minimum blade depth, usually
with about 13 mm (1/2 in.) of
the blade into the ground.
Tighten adjustment knob.
5. Before edging, plan your
direction of travel so that the
unit will always be positioned
on your right side and so that
you walk on a hard surface
whenever possible.
6. Hold edger as shown.